Vectrex Controller Pinout

Special thanks to Jay Tilton whose page provided this data for us.

[DB=9 connector]
  1. Button 1
  2. Button 2
  3. Button 3
  4. Button 4
  5. Horizontal pot
  6. Vertical pot
  7. +5v
  8. Gnd
  9. -5v

"The joystick potentiometers work by voltage division between -5V and +5V. Actually, it uses a couple of resistors on each side to make it more like -3.4V to 3.4V."

Vertical
Pin 6

Up +3.4v
Center 0v
Down -3.4v

Horizontal
Pin 5

left -3.4v
Center 0v
right +3.4v



All contents (c)1999 Game Station X unless otherwise noted. All trademarks copyright of their respective companies. Game Station X assumes absolutely no responsiblility whatsoever for any sort of damages incurred while either viewing this information or doing anything with said information. If you don't like it, change the channel. Some of this information may have come from other sources, and Game Station X in no way implies ownership of this information, and merely intends to provide a convenient source for finding this information. That said, we wrote this, and would appreciate your not lifting it for your own page without due credit. Mail us!