{{http://nfggames.com/games/snesAC/jg.png}}

{{http://nfggames.com/games/snesAC/snesAC.jpg}}

This is a standard US model Super Nintendo with the guts ripped out and replaced with JAMMA PCB playing gear.

{{http://nfggames.com/games/snesAC/snes_AC2.jpg}}

The fan sucks the hot air created by the power supply and replaces it with cool goodness. Remember kids: Melting = bad!

{{http://nfggames.com/games/snesAC/snes_AC4.jpg}}

Replaced the original ports with DB15 plugs wired to NEO GEO spec.

{{http://nfggames.com/games/snesAC/snes_AC3.jpg}}

When in use the expansion cover is removed and cool air enters through the hole.

{{http://nfggames.com/games/snesAC/snes3.jpg}}

Since the JAMMA connector doesn't stick out very far, innovative solutions were required.

{{http://nfggames.com/games/snesAC/snes_AC6.jpg}}

This is an innovative solution! One JAMMA harness connected to one JAMMA fingerboard, and presto - a JAMMA extension cable. Throw some shrink-tubing on there, dip the ends in plastic-dip, and it's a 4-foot piece of lovely.

{{http://nfggames.com/games/snesAC/snes_AC.jpg}}

The guts. Not pretty. I did this some six years ago. I'm a lot better at it now, I swear.

{{http://nfggames.com/games/snesAC/snes_AC5.jpg}}

I re-used the existing SNES AV connector by cutting the PCB, and throwing everything away that wasn't involved in holding the back panel down.

--

[[http://nfggames.com/games/snesAC/|Original page]]