===== X68000 Pro (CZ-652C) Floppy Drive Capacitor Replacement ===== Unlike the other models in the range, the X68000 Pro uses full-size 5.25" drives; it's one of the main things that contributes to the significant weight increase of the system compared to the upright models. Note: The capacitor lists here only apply to the X68000 Pro with floppy drive model **"Sharp CMECF0015CE01"**, also known as **"TEAC FD-55GFR - Part numer 19307350-60"**. Do not use this list for any other drive type: ^ Number ^ Location ^ Capacitance ^ Voltage ^ Notes ^ | C1 | Edge connector board | ??? | ??? | This is an all-black part with no rating label! | | C2 | Edge connector board | 22uF | 10v | | | C3 | Edge connector board | 100uF | 10v | | | C4 | Edge connector board | 10uF | 25v | | | C11 | Edge connector board | | | Ceramic, labelled as: SR 104M 12v | | C12 | Edge connector board | | | Ceramic, labelled as: SR 104M 12v | | C23 | Edge connector board | 6.8uF | 50v | | | C24 | Edge connector board | Not fitted | Not fitted | | | C25 | Edge connector board | 6.8uF | 50v | | | C26 | Edge connector board | Not fitted | Not fitted | | | C54 | Motorised eject board| 22uF | 25v | The only electrolytic cap on the board. | | C101 | Drive motor control board | 22uF | 16V | | | C104 | Drive motor control board | | | Ceramic, labelled as: 16X 100M | | C107 | Drive motor control board | 0.47uF | 50v | | Remember that you need twice as many components as listed above to do //both// drives. === Drive Images === {{:x68000:img20200804111656.jpg?400|}} - Underside of drive, Edge connector board & rear of Drive control board {{:x68000:img20200804113624.jpg?400|}} - Top of drive, Motorised ejection board {{:x68000:img20200804130230.jpg?400|}} - Drive motor control board