nfg.2y.net_games_snesac_snesac.jpg

This is a standard US model Super Nintendo with the guts ripped out and replaced with JAMMA PCB playing gear.

nfg.2y.net_games_snesac_snes_ac2.jpg

The fan sucks the hot air created by the power supply and replaces it with cool goodness. Remember kids: Melting = bad!

nfg.2y.net_games_snesac_snes_ac4.jpg

Replaced the original ports with DB15 plugs wired to NEO GEO spec.

nfg.2y.net_games_snesac_snes_ac3.jpg

When in use the expansion cover is removed and cool air enters through the hole.

nfg.2y.net_games_snesac_snes3.jpg

Since the JAMMA connector doesn't stick out very far, innovative solutions were required.

nfg.2y.net_games_snesac_snes_ac6.jpg

This is an innovative solution! One JAMMA harness connected to one JAMMA fingerboard, and presto - a JAMMA extension cable. Throw some shrink-tubing on there, dip the ends in plastic-dip, and it's a 4-foot piece of lovely.

nfg.2y.net_games_snesac_snes_ac.jpg

The guts. Not pretty. I did this some six years ago. I'm a lot better at it now, I swear.

nfg.2y.net_games_snesac_snes_ac5.jpg

I re-used the existing SNES AV connector by cutting the PCB, and throwing everything away that wasn't involved in holding the back panel down.

Original page