Table of Contents

The FDX68 is an add-on device to the Raspberry Pi 3B / 3B+ (and potentially newer revisions) that enables one to emulate an X68000 floppy drive on a real X68000. This wiki page was created to mirror information found on the original creator's web site. Please reference the original web site first for the most up-to-date information.

Original web site: (http://www.geocities.jp/kugimoto0715/fdx68/index.html)

New web site: (http://retropc.net/gimons/fdx68/index.html)

Background Information

The X68000, like many other devices made in the 1990's and earlier, uses ICs that communicate on 5V rails (0V = binary 0, 5V = binary 1). Modern electronics, use 3V rails (or even less). Hence, one can't connect a micro computer like a Raspberry Pi to an X68000, as the data bus voltages are not compatible.

The FDX68 is a device that plugs into the Raspberry Pi, and voltage converts between a Pi and X68000 floppy drive port (both internal and/or external). The actual emulation of the floppy drive happens in software; a very clever Linux application that runs on the Raspberry Pi. The FDX68 emulates 2 FD at the same time; external jumpers set which drives to emulate (0/1 internal, or 2/3 external). Lastly, LEDs are included on the device to show you drive activity.

PreReq

Setup and Usage

The original author has great instructions found here: http://retropc.net/gimons/fdx68/index.html Use google translate to get the details. The rest of this page was a result of edited google translate of original page (pulled 11/26/2018)

The following examples will not cover all possible combinations, but one should find the closest system and adjust accordingly based on connector and how they want to use the device. It is easiest to connect the FDX68 externally, but it can also be used internally (adjust drive assignment accordingly). Here are some important things to keep in mind:

X68000 XVI Compact

Connection Method

The external FDD connecter is labelled “EXTERNAL FDD” on the back of the X68000. This is a very unusual port known as the “miniature delta ribbon (MDR) 40 position female connector”. In order to connect an external device to this port an MDR 40 position male connector is necessary. The FDX68 author made a cable for converting this port to a standard 34-pin ribbon cable connector. One should be able to purchase the MDR 40 position male connector at many online retail stores. You will also need to purchase matching enclosure shell for the connector. The 3M part number for the connector is 10140-3000PE and matching shell is 10340-3210-000

When making your own cable to convert from MDR 40 to the 34-pin connector found on the FDX68, the following conversion table should be referenced. The pin assignment for creating the conversion cable is as follows. After soldering the pins, one should confirm they cable is soldered correctly using a voltmeter.

Here's how one connects the FDX68 externally to the X68000 using this custom cable

Internal FDD are drives 0,1 and FDX68 are drives 2,3

To use the internal FDD as the first and second boot drives (drive A: and B:) and the FDX68 emulated floppy disk drives as the third and fourth drives (drive C: and D:) do the following. Set the “INTERNAL FDD NO.” switch on the rear of the X68000 to 0,1. Next, set the FDX68 jumpers to location 2,3 for both DRV and OPT as shown below.

The X68000 can still boot a system from the FDX68 as long as no bootable floppies are found in the internal FDDs. It is also important to note that although games will boot from drives 2,3 many multi-disk games will only search for additional floppy disks in drives 0,1. This configuration is useful for booting HumanOS, or single disk games. It is also useful when the FDX68 emulator is not running but you still desire a bootable system.

Internal FDD are drives 2,3 and FDX68 are drives 0,1

To use the FDX68 emulated floppy disk drives as the first and second drives (drive A: and B:) and the internal FDD as the third and fourth disk drives (drive C: and D:) do the following. Set the “INTERNAL FDD NO.” switch on the rear of the X68000 to 2,3. Next, set the FDX68 jumpers to location 0,1 for both DRV and OPT as shown below.

This configuration will allow you to use multi-disk games using the FDX68 FDD emulator with no drive number issues. But the FDX68 must be running at startup. If drives 0,1 do not respond on boot-up (even with no disks) the X68000 will not boot (even when trying to boot to a hard drive). If you want to start your X68000 with the FDX68 disabled, change the “INTERNAL FDD NO.” switch back to 0,1.

Starting the Floppy Disk Drive emulator

FDX68 can emulate both XDF as well as FDX images. In this example, we will first convert an XDF image to FDX and then load it into the emulator.

Let's convert the system disk image of Human 3.02, which was released free of charge in XDF format. For image conversion, we use the fdxconv ​​utility. If you run fdxconv ​​with no arguments, a simple help screen will display with usage instructions. fdxconv ​​automatically determines the conversion process to use by using file extensions of the input and output files.

pi@raspberrypi:/fdx68 $ ./fdxconv
FDX68 version 1.00, Copyright (C) 2017-2018 GIMONS
Floppy image convert utility

Usage: ./fdxconv -i SRCFILE [-n DISKNO] -o DESTFILE

 SRCFILE is source image file path.
 DISKNO is disk number of multi image format, Default is 1.
 DESTFILE is destination image file path.

Here's an example of converting from XDF to FDX format. Because the original XDF image has only data sectors, it's only 1.2Mb big, but when converted to FDX format it will grow to about 5.5Mb.

pi@raspberrypi:/fdx68 $ ./fdxconv -i HUMAN302.XDF -o HUMAN302.FDX
FDX68 version 1.00, Copyright (C) 2017-2018 GIMONS
Floppy image convert utility

Input file   : HUMAN302.XDF
Disk no      : 1
Output file  : HUMAN302.FDX
pi@raspberrypi:/fdx68 $ ls -l HUMAN302.*
-rw-r--r-- 1 pi pi 5505280  8月  9 18:53 HUMAN302.FDX
-rw-r ----- 1 pi pi 1261568 August 9 18:53 HUMAN302.XDF
pi@raspberrypi:/fdx68 $

After successfully converting the system disk of Human 3.02 to FDX format, let's copy this to HUMAN302_A.FDX and HUMAN302_B.FDX and start the fddemu emulator with these 2 disk images in the emulated drives (This is just an exercise to show you how to use fddemu to emulate 2 disk images. You can also start the emulator with 1 or no disk images loaded by default)

pi@raspberrypi:/fdx68 $ cp HUMAN302.FDX HUMAN302_A.FDX
pi@raspberrypi:/fdx68 $ cp HUMAN302.FDX HUMAN302_B.FDX
pi@raspberrypi:/fdx68 $ sudo ./fddemu -0 HUMAN302_A.FDX -1 HUMAN302_B.FDX &
FDX68 version 1.00, Copyright (C) 2017-2018 GIMONS
Floppy disk drive emulation

----+----+----+-----------------------------------
 ID | WP | CL | DISK IMAGE
----+----+----+-----------------------------------
  0 | -- | 00 | HUMAN302_A.FDX
  1 | -- | 00 | HUMAN302_B.FDX
----+----+----------------------------------------

As you can see in the picture below, there are no floppies inserted into X68000 Compact and it is booting from the FDX68. After the system has booted, one can use the drive command to list what floppy disk drives the X68000 has detected. One can see that the X68000 recognized a 4 drive configuration and that we are able to access the 2 emulated floppy disk drives.

Swap disks using the command line

The floppy disk drive of the X68000 has extended specifications including a floppy auto eject mechanism. The floppy eject operation can be instructed both using the eject button on the main unit as well as on the command line. For example, the X68000 game A-JAX boots with both a program disk and data disk 1, the program disk automatically ejects after reading the data and asks the user to insert data disk 2. In this example, we will show how to change a floppy disk using the FDX68. First, lets boot A-JAX:

pi@raspberrypi:/fdx68 $ sudo ./fddemu -0 AJAX_P.FDX -1 AJAX_1.FDX &
[1] 719
pi@raspberrypi:/fdx68 $ FDX68 version 1.00, Copyright (C) 2017-2018 GIMONS
Floppy disk drive emulation

----+----+----+-----------------------------------
 ID | WP | CL | DISK IMAGE
----+----+----+-----------------------------------
  0 | ON | 00 | AJAX_P.FDX
  1 | ON | 00 | AJAX_1.FDX
----+----+----------------------------------------

pi@raspberrypi:/fdx68 $

Note that “&” is appended at the end of the command line to load the FDX68 service in the background and return command line control back to the user. Next, we check whether FDX68 is running in the background. We search for it using the ps command.

pi@raspberrypi:/fdx68 $ ps -ef | grep fddemu
root       719   661  0 12:16 pts/0    00:00:00 sudo ./fddemu -0 AJAX_P.FDX -1 AJAX_1.FDX
root       723   719  0 12:16 pts/0    00:00:00 ./fddemu -0 AJAX_P.FDX -1 AJAX_1.FDX
pi         744   661  0 12:17 pts/0    00:00:00 grep --color=auto fddemu
pi@raspberrypi:/fdx68 $

Note that the fddemu daemon/service must execute as root. You can also check status and what disk is inserted into fddemu using the fddctrl utility:

pi@raspberrypi:/fdx68 $ ./fddctl -l
----+----+----+-----------------------------------
 ID | WP | CL | DISK IMAGE
----+----+----+-----------------------------------
  0 | ON | 00 | AJAX_P.FDX
  1 | ON | 00 | AJAX_1.FDX
----+----+----------------------------------------
pi@raspberrypi:/fdx68 $

You can now turn on the X68000 and try to boot AJAX. After loading the disk for a while, you will be prompted to insert another disk as shown below. At this time, the floppy disk in drive 0 is ejected.

pi@raspberrypi:/fdx68 $ ./fddctl -l
----+----+----+-----------------------------------
 ID | WP | CL | DISK IMAGE
----+----+----+-----------------------------------
  0 | -- | 00 | EMPTY
  1 | ON | 00 | AJAX_1.FDX
----+----+----------------------------------------
pi@raspberrypi:/fdx68 $

Next, insert A-JAX Data disk 2 using the fddctl utility:

pi@raspberrypi:/fdx68 $ ./fddctl -i 0 -c insert -f AJAX_2.FDX
pi@raspberrypi:/fdx68 $ ./fddctl -l
----+----+----+-----------------------------------
 ID | WP | CL | DISK IMAGE
----+----+----+-----------------------------------
  0 | ON | 00 | AJAX_2.FDX
  1 | ON | 62 | AJAX_1.FDX
----+----+----------------------------------------
pi@raspberrypi:/fdx68 $

Additional information about disk image format

In the above examples, the floppy disk images were converted to the FDX format prior to usage. The FDX68 FDD emulator fddemu can start without converting the image first and supports other images formats, such as XDF or D68 (it automatically converts to FDX in memory) It is important to note that any format outside of FDX will not save back to the disk image. This is convenient for launching applications and games that do not need save feature. If you do require the ability to save back to disk, you will need to convert to FDX first.

X68000 PRO and similar systems

Connection Method

The external floppy disk drive connecter is labelled “EXTERNAL FDD” on the back of the X68000. This is a pretty common connector known as the “D-SUB 37 pin female connector” or DB37. In order to connect an external device to this port a Db37 pin male connector is necessary. One should be able to purchase a DB37 pin male connector at many online retail stores. You will also need to purchase the matching enclosure shell for the connector. Lastly, you will require a way to connect this to the FDX68. A standard floppy disk drive cable (ribbon or round) will work well.

When making your own cable to convert from DB37 to the 34-pin connector found on the FDX68, the following conversion table and FDX68 pinout should be referenced; match the description of the pins and solder accordingly. After soldering the pins, one should confirm they cable is soldered correctly using a voltmeter.

NOTE: The DB37 connector should have numbers on them. Follow those numbers. Don't get confused by the picture below as the pin numbers are different depending if you look at the front or the back of the connector.

Ext. Pin Signal Dir. Description
1 /Disk Type SelectOutDisk type selection signal
2 NC - Not connected
3 /Drive Select 3OutDrive selection signal 3
4 /Index In Disk index signal
5 /Drive Select 0OutDrive selection signal 0
6 /Drive Select 1OutDrive selection signal 1
7 /Drive Select 2OutDrive selection signal 2
8 /Motor OnOutMotor starting signal
9 /DirectionOutHead moving direction signal
10 /StepOutHead movement signal
11 /Write DataOutWrite data signal
12 /Write GateOutWrite gate signal
13 /Track 00 In Back to track 0
14 /Write Protect In Write protect signal
15 /Read Data In Read data signal
16 /Side SelectOutHead switching signal
17 /Ready In Drive ready signal
18 NC - Not connected
19 NC - Not connected
20 /Option Select 0OutOption select 0
21 /Option Select 1OutOption Select 1
22 /Option Select 2OutOption select 2
23 /Option Select 3OutOption Select 3
24 /EjectOutEject signal
25 /Eject MaskOutEject mask signal
26 /LED BlinkOutLED flashing signal
27 /Disk In In Disk insertion signal
28 /ERR Disk In Disk insertion error signal
29 /FDD INT In Disk interrupt signal
30 GroundOutGround
31 GroundOutGround
32 GroundOutGround
33 GroundOutGround
34 GroundOutGround
35 GroundOutGround
36 GroundOutGround
37 NC - Not connected

Internal FDD are drives 0,1 and FDX68 are drives 2,3

It is not possible to change the ID of the built-in floppy disk drives with a switch on the rear. Therefore the internal FDD are always assigned the first and second boot drives (drive A: and B:) and the FDX68 emulated floppy disk drives as the third and fourth drives (drive C: and D:) you must set the FDX68 jumpers to location 2,3 for both DRV and OPT as shown below.

The X68000 can still boot a system from the FDX68 as long as no bootable floppies are found in the internal FDDs. It is also important to note that although games will boot from drives 2,3 many multi-disk games will only search for additional floppy disks in drives 0,1. This configuration is useful for booting HumanOS (to install SASI boot loader into SRAM, or change SRAM configuration), or single disk games.

Internal FDD are drives 2,3 and FDX68 are drives 0,1

To use the FDX68 emulated floppy disk drives as the first and second drives (drive A: and B:) and the internal FDD as the third and fourth disk drives (drive C: and D:) do the following. Set the FDX68 jumpers to location 0,1 for both DRV and OPT as following:

Next, you will need to change the jumpers on the built-in floppy disk drives. As soon as you remove the cover of the system, you will see the FDD but the jumper is on the back of the internal floppy disk drive, hidden by the cable and it is hard to see and change it. You will need to remove the floppy disk drive. The jumper is not divided by DRIVE and OPTION like on the FDX68. It will be a green jumper as seen below, change this jumper to position 2 or 3 depending on the drive you are working on (both drives can not be set to the same number)

This configuration will allow you to use multi-disk games using the FDX68 FDD emulator with no drive number issues. But the FDX68 must be running at startup. If drives 0,1 do not respond on boot-up (even with no disks) the X68000 will not boot (even when trying to boot to a hard drive).

Starting the Floppy Disk Drive emulator

Using the FDX68 software to emulate the floppy disk drive, mount/unmount images, convert images, etc. is the same on all systems. Please refer above for instructions on how to use the software.