arcade:bishi_bashi_champ
Table of Contents
Bishi Bashi Champ Panel
The Bishi Bashi panel for Sega's arcade machines (also Konami's Windy and a few others) is a simple one, and has only eight buttons on it: three big buttons and a start button for each player.
Game Control Wiring
The wiring for it is complicated slightly by the need for lights under each of the big buttons. The game controls are wired up using the usual Sega City Cabinet Pinouts.
| Pin | Function | Pin | Function | Pin | Function |
|---|---|---|---|---|---|
| 1 | Start | 5 | 9 | ||
| 2 | 6 | Button 1 | 10 | ||
| 3 | 7 | Button 2 | 11 | ||
| 4 | 8 | Button 3 | 12 | Ground |
Button Lights Wiring
The lights are controlled by the Bishi Bashi PCB directly.
The connector from the panel is a JST NH-series 16-pin receptacle, part number H16P-SHF-AA.
| Pin | Function | Pin | Function | Pin | Function | Pin | Function |
|---|---|---|---|---|---|---|---|
| 1 | 1P Lamp 1 | 5 | 1P Lamp 1 | 9 | 3P Lamp 1 | 13 | 1P Lamp Start |
| 2 | 1P Lamp 2 | 6 | 1P Lamp 1 | 10 | 3P Lamp 1 | 14 | 2P Lamp Start |
| 3 | 1P Lamp 3 | 7 | 1P Lamp 1 | 11 | 3P Lamp 1 | 15 | 3P Lamp Start |
| 4 | +12V | 8 | +12V | 12 | +12V | 16 | +12V |
For your ordering convenience:
| Part No. | |
|---|---|
| Housing | H16P-SHF-AA |
| Contact (28-22 AWG) | SHF-001T-0.8BS |
| Contact (30-28 AWG) | SHF-002T-0.8BS |
arcade/bishi_bashi_champ.txt · Last modified: by NFG