User Tools

Site Tools


arcade:sega_pras_allnet_pinouts

SEGA All.Net P-ras Pinouts

The P-ras cabinet is one of Sega's newest, and it doesn't share many connectors with previous cabinets.

Part Numbers

Control Panel Pinouts

The JST XAD series of connectors use an even-odd numbering scheme, rather than running in sequence along the long edge. The key points to pin one, pin two is on the opposite side. Pin 2, 5 and every 5th pin are labeled as shown below.

Player 1

JST XAD series 24-pin connector

Pin Function Pin Function
1 +5V 2 +5V
3 +5V 4 +12V
5 Start 6 Right
7 Left 8 Up
9 Down 10 Button 1
11 Button 2 12 Button 3
13 Button 4 14 Button 5
15 Button 6 16 Button 7
17 Button 8 18 A/D Channel 1
19 A/D Channel 5 20 Ground 1
21 Ground 2 22 Analogue Ground 1
23 Analogue Ground 2 24

Player 2

Note that Player 2 only has six buttons, and uses a 22 pin connector. Button 7 & 8 for Player 2 are found on other connectors if required (Coin & Service and Coin Counter)

JST XAD series 24-pin connector

Pin Function Pin Function
1 +5V 2 +5V
3 +5V 4 +12V
5 Start 6 Right
7 Left 8 Up
9 Down 10 Button 1
11 Button 2 12 Button 3
13 Button 4 14 Button 5
15 Button 6 16 A/D Channel 2
17 A/D Channel 6 18 Ground 1
19 Ground 2 20 Analogue Ground 1
21 Analogue Ground 2 22

Coin & Service

Coin & Service

JST YL series 12-pin connector

Pin Function Pin Function Pin Function
1 Coin 1 5 2P Button 8 9 1P Service
2 Coin 2 6 Coin 12V 10 Test & Service GND
3 Output 2 7 Coin GND 11
4 Output 5 8 Test 12

Coin Counters

JST YL series 8-pin connector

Pin Function Pin Function
1 Counter 1 5V 5 Counter 2
2 Counter 2 5V 6 Output 3
3 Counter 3 5V 7 2P Button 7
4 Counter 1 8 Counter GND

Coin Counter x

This connector repeats for each coin counter.

JST YL series 4-pin connector

Pin Function Pin Function
1 Counter 5V
2 Counter
3
4
arcade/sega_pras_allnet_pinouts.txt · Last modified: by NFG