User Tools

Site Tools


av:adding_5v_to_scart_lead

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
av:adding_5v_to_scart_lead [2019/08/27 20:45] – external edit 127.0.0.1av:adding_5v_to_scart_lead [2020/07/28 08:48] (current) – Added connector detail NFG
Line 20: Line 20:
   * Use a reliable connector for the power, and use some wire that's thick enough to not break off or wear out during normal use.   * Use a reliable connector for the power, and use some wire that's thick enough to not break off or wear out during normal use.
  
-=== Apologies === +=== Connector === 
-I don't know what the connector is called that I used for power.  I bought a handful of them in Japan, they weren't marked.  Anything will do, I used these because they were small and handy.+The 2-pin connector used here is a [[http://www.jst-mfg.com/index_e.php|JST]] (Japan Solderless Terminal) [[http://www.jst-mfg.com/product/detail_e.php?series=59|EL-series]]connector.  I bought a handful of them in Japan, they weren't marked.  Anything will do, I used these because they were small and handy.
  
 == Alternative for Scart == == Alternative for Scart ==
   * A quick fix can be implemented by using a 9V battery (positive lead on Pin 8, negative lead on any of the grounds) and a 150 Ohms resistor between Pin 8 and Pin 16.   * A quick fix can be implemented by using a 9V battery (positive lead on Pin 8, negative lead on any of the grounds) and a 150 Ohms resistor between Pin 8 and Pin 16.
   * Either three or four AA batteries can be used as well.(definitely use four if they're rechargeables, they're usually only 1.2v each)   * Either three or four AA batteries can be used as well.(definitely use four if they're rechargeables, they're usually only 1.2v each)
av/adding_5v_to_scart_lead.1566902722.txt.gz · Last modified: 2019/08/27 20:45 by 127.0.0.1