av:csy-2100
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
av:csy-2100 [2015/04/06 19:14] – [SCART/RGB Pinout] segasonicfan | av:csy-2100 [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 10: | Line 10: | ||
The SCART RGB connector on the CSY-2100 is wired to the Standard SCART specification. | The SCART RGB connector on the CSY-2100 is wired to the Standard SCART specification. | ||
Note: Composite video must be used as the sync input, not TTL level C Sync that most consoles output. | Note: Composite video must be used as the sync input, not TTL level C Sync that most consoles output. | ||
- | [[http:// | + | *[[http:// |
- | [[http:// | + | *[[http:// |
- | or just use the composite signal your console outputs. | + | or just use the composite signal your console outputs. |
The sync (pin 20) is 75ohms terminated to ground at the input. | The sync (pin 20) is 75ohms terminated to ground at the input. | ||
===== Variable Resistors (Internal Adjustments) ===== | ===== Variable Resistors (Internal Adjustments) ===== |
av/csy-2100.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1