User Tools

Site Tools


av:dreamcast_480i-480p_scart_cable

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
av:dreamcast_480i-480p_scart_cable [2007/08/08 13:32] – external edit 127.0.0.1av:dreamcast_480i-480p_scart_cable [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ==== Dreamcast 480p/480i SCART Cable ==== ==== Dreamcast 480p/480i SCART Cable ====
  
-The Dreamcast outputs both 480i and 480p video. Rather than using a regular scart cable and a VGA box I wanted to combine the two into a single scart cable. To do this it's necessary to combine the TTL logic level H and V sync siggnals generated by the Dreamcast and produce a 75ohm impeddance SCART compatible signal.+The Dreamcast outputs both 480i and 480p video. Rather than using a regular scart cable and a VGA box I wanted to combine the two into a single scart cable. To do this it's necessary to combine the TTL logic level H and V sync siggnals generated by the Dreamcast and produce a 75ohm impedance SCART compatible signal.
  
-The Dreamcast has two RGB selsect lines pin 7 (rgb mode select) and pin 6 (VGA mode select). Pin 7 should be tied to ground as it is grounded for either type of rgb. I used a DPDT switch to switch pin 6 between floating and ground and the sync from csync to the combined 480p sync signal.+The Dreamcast has two RGB select lines pin 7 (rgb mode select) and pin 6 (VGA mode select). Pin 7 should be tied to ground as it is grounded for either type of rgb. I used a DPDT switch to switch pin 6 between floating and ground and the sync from csync to the combined 480p sync signal.
  
  
av/dreamcast_480i-480p_scart_cable.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1