User Tools

Site Tools


av:jaguar_50_60_hz_switch

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
av:jaguar_50_60_hz_switch [2005/12/17 23:19] – tweaked difficulty stars nfgav:jaguar_50_60_hz_switch [2007/03/02 02:15] – external edit 127.0.0.1
Line 8: Line 8:
 If you want comfortable, get a two-state switch from your favourite electronics parts store, solder it to the ends of the now-open bridge with two wires. Then, dremel/punch/bite a hole in the front of your Jag case and put the switch there so you can reach it from outside even when the case is closed. Now you have a Jaguar that can be easily switched from 50 to 60 Hz and back. If you want comfortable, get a two-state switch from your favourite electronics parts store, solder it to the ends of the now-open bridge with two wires. Then, dremel/punch/bite a hole in the front of your Jag case and put the switch there so you can reach it from outside even when the case is closed. Now you have a Jaguar that can be easily switched from 50 to 60 Hz and back.
  
-<box round warning|NOTE>It might be harmful to switch modes while the Jaguar is running. I haven't tried it so far, but it just doesn't seem like a good idea.</box>+<box round warning|NOTE>It might be harmful to switch modes while the Jaguar is running. I haven't tried it so far, but it just doesn't seem like a good idea. However other consoles dont seem to mind, so it's up to you to make the decision</box>
av/jaguar_50_60_hz_switch.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1