NFG Games + GameSX

User Tools

Site Tools

Trace:
av:japanese_rgb-15

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
av:japanese_rgb-15 [2016/05/30 15:33] – Added intro about the Ys line. lawrenceav:japanese_rgb-15 [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 59: Line 59:
   * Not all systems put out power on pin 7.  Normally +5v, some devices (like the X-RGB2) leave this pin disconnected.  You can add power to your cables, for monitors that require it, following [[adding_5v_to_scart_lead|these directions]].   * Not all systems put out power on pin 7.  Normally +5v, some devices (like the X-RGB2) leave this pin disconnected.  You can add power to your cables, for monitors that require it, following [[adding_5v_to_scart_lead|these directions]].
   * Remember that the pin numbers are almost always found on the connector itself.   * Remember that the pin numbers are almost always found on the connector itself.
 +  * CRITICAL: H and V sync are TTL level (5Vpp) If you make a SCART cable and tie pins together, you must use a resistor (470ohm - NOT CONFIRMED) to lower voltages to safe levels for 75ohm / 0.3Vpp CSYNC or else you’ll damage the X68K or your display device (eg XRGB mini)
  
 ---- ----
 **Credit:** **Credit:**
   * Some of this info came from [[http://hp.vector.co.jp/authors/VA018718/towns/connect/pinasgn.htm|this Japanese page]].   * Some of this info came from [[http://hp.vector.co.jp/authors/VA018718/towns/connect/pinasgn.htm|this Japanese page]].
av/japanese_rgb-15.1464586418.txt.gz · Last modified: 2019/08/27 20:44 (external edit)