User Tools

Site Tools


av:scart2rgb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
av:scart2rgb [2006/10/30 21:47] – Added power link 210.49.242.31av:scart2rgb [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ===== RGB / SCART Adaptors =====  ===== RGB / SCART Adaptors ===== 
-{{skill>4/10}}+
 Being in a PAL land now (Australia) I'm suddenly aware of a need for a definitive solution for converting RGB to SCART for blissfully clear gaming love.  Here then is how I did it: Being in a PAL land now (Australia) I'm suddenly aware of a need for a definitive solution for converting RGB to SCART for blissfully clear gaming love.  Here then is how I did it:
  
Line 6: Line 6:
  
 {{connectors:con-rgb21.gif}} {{connectors:con-rgb21.gif}}
 +
 ==== The pinout ==== ==== The pinout ====
  
Line 13: Line 14:
 |  20 |  Blue  | 7  | |  20 |  Blue  | 7  |
 |  9 |  Sync/Video  | 20  | |  9 |  Sync/Video  | 20  |
-|  1 |  Left  |  | +|  1 |  Left  |  | 
-|  5 |  Right  |  |+|  5 |  Right  |  |
 |  16 |  +5v/Blanking  | 16  | |  16 |  +5v/Blanking  | 16  |
 |  13, 18, 17 |  Ground  | 13, 14, 17  | |  13, 18, 17 |  Ground  | 13, 14, 17  |
Line 24: Line 25:
   * I used +5v for blanking, but you may need to use a 100Ohm resistor on this line.   * I used +5v for blanking, but you may need to use a 100Ohm resistor on this line.
   * Ground is Ground, you don't have to use separate wires from end to end.  One ground line is enough, but you must connect ALL the ground pins to each other on each end.   * Ground is Ground, you don't have to use separate wires from end to end.  One ground line is enough, but you must connect ALL the ground pins to each other on each end.
 +
 +==== Other Useful Stuff ====
 +  * [[japanese_rgb-21|RGB-21 Connector]] in more detail
 +  * [[http://www.gamesx.com/hwb/co_Scart.html | SCART connector]]
   * If you're connecting your display to a console or device that doesn't offer a blanking (power) signal, you can easily [[adding_5v_to_scart_lead|Add power to your SCART/RGB cable]]   * If you're connecting your display to a console or device that doesn't offer a blanking (power) signal, you can easily [[adding_5v_to_scart_lead|Add power to your SCART/RGB cable]]
  
av/scart2rgb.1162208848.txt.gz · Last modified: 2019/08/27 20:44 (external edit)