User Tools

Site Tools


av:scart_connector

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
av:scart_connector [2005/12/25 10:59] – Added a link, changed some text. nfgav:scart_connector [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ===== The SCART Connector ===== ===== The SCART Connector =====
-The SCART connector, also known as a Péritel or Euroconnector or, is a multi-function connector that is identical in shape, but not function, to the [[Japanese RGB-21]] connector.  It carries RGB, s-video, composite video in and out, and stereo audio in and out.  It can also carry component video (and other signals), however these uses appear to be non-standard and the pinout is not known+The SCART connector, also known as a Péritel or Euroconnector or, is a multi-function connector that is identical in shape, but not function, to the [[Japanese RGB-21]] connector.  It carries RGB, composite video in and out, and stereo audio in and out.  It can also carry component video and s-video, however these uses are non-standard and aren't supported by all televisions
  
 This page deals only with the RGB uses for a SCART display,  A fantastic page detailing all the other uses for a SCART connector can be found [[http://utopia.knoware.nl/users/eprebel/SoundAndVision/Engineering/SCART.html|right here]]. This page deals only with the RGB uses for a SCART display,  A fantastic page detailing all the other uses for a SCART connector can be found [[http://utopia.knoware.nl/users/eprebel/SoundAndVision/Engineering/SCART.html|right here]].
Line 21: Line 21:
   * The numbering is the same on the SCART and RGB-21 connectors   * The numbering is the same on the SCART and RGB-21 connectors
   * Direction is display relative.  In = into display.  Out = out of display.   * Direction is display relative.  In = into display.  Out = out of display.
 +
  
  
Line 38: Line 39:
  
   * Not all TVs recognize these signals correctly or at all.   * Not all TVs recognize these signals correctly or at all.
-  * Some TVs will not function without these signals.+  * Some TVs will not function without these signals. A quick fix can be implemented by using a 9V battery (positive lead on Pin 8, negative lead on any of the grounds) and a 150 Ohms resistor between Pin 8 and Pin 16.
   * Some TVs can be manually forced into these modes.   * Some TVs can be manually forced into these modes.
  
av/scart_connector.1135472377.txt.gz · Last modified: 2019/08/27 20:44 (external edit)