Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
av:wii_multi_av_pinout [2014/01/15 14:24]
ApolloBoy
av:wii_multi_av_pinout [2017/09/18 16:29] (current)
Kadano Added statement that the mode pins don't work on PAL consoles
Line 17: Line 17:
   * Luma/Chroma are the Y/C pins on S-video connectors.   * Luma/Chroma are the Y/C pins on S-video connectors.
   * MODE pins: On PAL systems the default output is RGB + composite, on NTSC the default is S-video + composite. ​ With pins 8 and 10 shorted, systems from both territories will switch to component video.   * MODE pins: On PAL systems the default output is RGB + composite, on NTSC the default is S-video + composite. ​ With pins 8 and 10 shorted, systems from both territories will switch to component video.
-  * Pins 14, 15 and 16 are used by the Japanese D-Terminal cable.+  * Pins 14, 15 and 16 are used by the Japanese D-Terminal cable. They are confirmed non-functional on PAL consoles.
     - Data Line 1: 0V = 525 lines (default) ; 2.2V = 750 lines ; 5V = 1125 lines     - Data Line 1: 0V = 525 lines (default) ; 2.2V = 750 lines ; 5V = 1125 lines
     - Data Line 2: 0V = 59.94i / 60i ; 5V = 59.94p / 60p     - Data Line 2: 0V = 59.94i / 60i ; 5V = 59.94p / 60p
 
 av/wii_multi_av_pinout.txt ยท Last modified: 2017/09/18 16:29 by Kadano
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
Recent changes RSS feed Driven by DokuWiki