User Tools

Site Tools


controls:neo_geo_controller

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
controls:neo_geo_controller [2008/07/26 20:49] – Fixed image link 58.111.129.224controls:neo_geo_controller [2023/05/11 09:49] (current) – replaced missing image NFG
Line 1: Line 1:
-{{http://www.gamesx.com/grafx/conn_dsub15f.gif?nocache}}+{{:controls:db15.gif?400|{{:controls:fami.gif|DB-15 Connector}}}}
  
 ^Pin^Description^-^Pin^Description^ ^Pin^Description^-^Pin^Description^
Line 11: Line 11:
 |8|+5v|-|-|-| |8|+5v|-|-|-|
  
-This diagram shows the connector looking at the end of the joystick cable. The numbering runs backwards to match the numbering of a DB-15 male connector. These connectors should be available at any electronics store, or perhaps a computer store. It's the same as an IBM joystick connector. +This diagram shows the connector looking at the console These connectors should be available at any electronics store, or perhaps a computer store. It's the same as an IBM joystick connector. 
  
   * Pin 8 provides +5v to the controller. This is unused in the original stick, but is mandatory for proper use of the pads and new-style sticks.   * Pin 8 provides +5v to the controller. This is unused in the original stick, but is mandatory for proper use of the pads and new-style sticks.
   * There are two D pins.  While the controller returns low for both pins 9 and 4, only 4 is 'listened' to by the machine.   * There are two D pins.  While the controller returns low for both pins 9 and 4, only 4 is 'listened' to by the machine.
controls/neo_geo_controller.1217069384.txt.gz · Last modified: 2019/08/27 20:44 (external edit)