controls:neo_geo_controller
This is an old revision of the document!
Pin | Description | - | Pin | Description |
---|---|---|---|---|
1 | Common (GND) | - | 9 | D Button |
2 | NC | - | 10 | NC |
3 | Select | - | 11 | Start |
4 | D Button | - | 12 | C Button |
5 | B Button | - | 13 | A Button |
6 | Right | - | 14 | Left |
7 | Down | - | 15 | Up |
8 | +5v | - | - | - |
This diagram shows the connector looking at the end of the joystick cable. The numbering runs backwards to match the numbering of a DB-15 male connector. These connectors should be available at any electronics store, or perhaps a computer store. It's the same as an IBM joystick connector.
- Pin 8 provides +5v to the controller. This is unused in the original stick, but is mandatory for proper use of the pads and new-style sticks.
- There are two D pins. While the controller returns low for both pins 9 and 4, only 4 is 'listened' to by the machine.
controls/neo_geo_controller.1206581617.txt.gz · Last modified: 2019/08/27 20:44 (external edit)