Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
snes2jamma [2005/08/13 22:00]
203.26.206.130
snes2jamma [2009/06/20 07:19] (current)
189.136.179.9 Fixed nfggames.com URIs
Line 1: Line 1:
-{{http://nfg.2y.net/​games/​snesAC/​jg.png}}+{{http://nfggames.com/​games/​snesAC/​jg.png}}
  
-{{http://nfg.2y.net/​games/​snesAC/​snesAC.jpg}}+{{http://nfggames.com/​games/​snesAC/​snesAC.jpg}}
  
 This is a standard US model Super Nintendo with the guts ripped out and replaced with JAMMA PCB playing gear. This is a standard US model Super Nintendo with the guts ripped out and replaced with JAMMA PCB playing gear.
  
-{{http://nfg.2y.net/​games/​snesAC/​snes_AC2.jpg}}+{{http://nfggames.com/​games/​snesAC/​snes_AC2.jpg}}
  
 The fan sucks the hot air created by the power supply and replaces it with cool goodness. Remember kids: Melting = bad! The fan sucks the hot air created by the power supply and replaces it with cool goodness. Remember kids: Melting = bad!
  
-{{http://nfg.2y.net/​games/​snesAC/​snes_AC4.jpg}}+{{http://nfggames.com/​games/​snesAC/​snes_AC4.jpg}}
  
 Replaced the original ports with DB15 plugs wired to NEO GEO spec. Replaced the original ports with DB15 plugs wired to NEO GEO spec.
  
-{{http://nfg.2y.net/​games/​snesAC/​snes_AC3.jpg}}+{{http://nfggames.com/​games/​snesAC/​snes_AC3.jpg}}
  
 When in use the expansion cover is removed and cool air enters through the hole. When in use the expansion cover is removed and cool air enters through the hole.
  
-{{http://nfg.2y.net/​games/​snesAC/​snes3.jpg}}+{{http://nfggames.com/​games/​snesAC/​snes3.jpg}}
  
 Since the JAMMA connector doesn'​t stick out very far, innovative solutions were required. Since the JAMMA connector doesn'​t stick out very far, innovative solutions were required.
  
-{{http://nfg.2y.net/​games/​snesAC/​snes_AC6.jpg}}+{{http://nfggames.com/​games/​snesAC/​snes_AC6.jpg}}
  
 This is an innovative solution! One JAMMA harness connected to one JAMMA fingerboard,​ and presto - a JAMMA extension cable. Throw some shrink-tubing on there, dip the ends in plastic-dip,​ and it's a 4-foot piece of lovely. This is an innovative solution! One JAMMA harness connected to one JAMMA fingerboard,​ and presto - a JAMMA extension cable. Throw some shrink-tubing on there, dip the ends in plastic-dip,​ and it's a 4-foot piece of lovely.
  
-{{http://nfg.2y.net/​games/​snesAC/​snes_AC.jpg}}+{{http://nfggames.com/​games/​snesAC/​snes_AC.jpg}}
  
 The guts. Not pretty. I did this some six years ago. I'm a lot better at it now, I swear. The guts. Not pretty. I did this some six years ago. I'm a lot better at it now, I swear.
  
-{{http://nfg.2y.net/​games/​snesAC/​snes_AC5.jpg}}+{{http://nfggames.com/​games/​snesAC/​snes_AC5.jpg}}
  
 I re-used the existing SNES AV connector by cutting the PCB, and throwing everything away that wasn't involved in holding the back panel down. I re-used the existing SNES AV connector by cutting the PCB, and throwing everything away that wasn't involved in holding the back panel down.
Line 35: Line 35:
 -- --
  
-[[http://nfg.2y.net/​games/​snesAC/​|Original page]]+[[http://nfggames.com/​games/​snesAC/​|Original page]]
 
 snes2jamma.txt ยท Last modified: 2009/06/20 07:19 by 189.136.179.9
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
Recent changes RSS feed Driven by DokuWiki