Differences

This shows you the differences between two versions of the page.

--- x68000:advanced_floppy_driver_repair [2010/03/29 06:41] – eidis
+++ x68000:advanced_floppy_driver_repair [2010/03/29 06:45] – eidis
@@ Line 25: / Line 25: @@
 {{:x68000:floppy_02.jpg|}}
- Remove the signal cables by pulling them in straight direction away from the socket. Use tweezers to gently disconnect the big brown signal cables and use extreme caution when disconnection the signal cable which goes to the step motor. Grab its wires tight at the base of the plastic so that they are not loose and gently jiggle the plug out of the socket. Unscrew the eight circled screws. Please note that by unscrewing the four screws from the rotating disk assembly allows better access to capacitors and makes replacing them a bit easier.
+ Disconnect the signal cables by pulling them in straight direction away from the socket. Use tweezers to gently disconnect the big brown signal cables and use extreme caution when disconnection the signal cable which goes to the step motor. Grab its wires tight at the base of the plastic so that they are not loose and gently jiggle the plug out of the socket. Unscrew the eight circled screws. Please note that by unscrewing the four screws from the rotating disk assembly allows better access to capacitors and makes replacing them a bit easier.
 {{:x68000:floppy_03.jpg|}}
-Remove the two circled signal wires.
+Disconnect the two circled signal wires.
 {{:x68000:floppy_04.jpg|}}