User Tools

Site Tools


x68000:cz-6bs1_-_genuine_sharp_scsi_board

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
x68000:cz-6bs1_-_genuine_sharp_scsi_board [2011/12/12 00:22] eidisx68000:cz-6bs1_-_genuine_sharp_scsi_board [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 48: Line 48:
 4-1 Names of Parts 4-1 Names of Parts
  
-{{:x68000:cz-6bs1_3.png|}}+{{:x68000:cz-6bs1_3_translated.png|}}
  
 4-2 Jumper settings 4-2 Jumper settings
  
-Jumpers JP1, JP2 set the interrupt priority for 68000MPU to level 2 or 4 (Source I/0 is available in two levels) and the board interprets from the jumper settings which one to use. Factory default is set to level 2. If you own the software, interrupt handling is set as follows. +Jumpers JP1, JP2 set the interrupt priority for 68000 CPU to level 2 or 4 (Source I/0 is available in two levels) and the board interprets from the jumper settings which one to use. Factory default is set to level 2. If you own the software, interrupt handling is set as follows. 
 Set the priority level of the interrupt request signal with jumper JP2, set the interrupt priority level of the allowed signal with jumper JP1. The priority level can be selected as Level 2 or Level 4. Set the priority level of the interrupt request signal with jumper JP2, set the interrupt priority level of the allowed signal with jumper JP1. The priority level can be selected as Level 2 or Level 4.
  
Line 69: Line 69:
 "Connection Example" "Connection Example"
  
-{{:x68000:cz-6bs1_4.png|}}+{{:x68000:cz-6bs1_4_translated.png|}}
  
x68000/cz-6bs1_-_genuine_sharp_scsi_board.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1