x68000:editing_and_adding_files_to_hard_disk_images
This is an old revision of the document!
Table of Contents
Editing and adding files to hard disk images
There will be times when you want to add something to your X68000's hard drive.
Three easy and convenient methods are detailed here:
- DiskExplorer is by far the easiest and quickest but is not recommended because it sometimes leads to data corruption. Use at your own risk.
- The preferred method for file transfers larger than 10mb is WINDRV.SYS.
- Small incremental updates can be transferred by using MuTerm.
DiskExplorer
- Download the latest version of DiskExplorer
- Launch it and select the desired hard disk image and its profile:
- *.HDF for SASI (Human68k HDD)
- *.HDS for SCSI (Human68k HDD SCSI)
- Drag and drop files to the opened image
WINDRV.SYS
- Download HDD image V4 and boot from it in XM6 TypeG
- Highlight CONFIG.SYS file and press “E” key
- Delete “REM ” from the last line and press “ESC” and then “X” key
- Select Tools→Options→Windrv in XM6 TypeG. Tick the “Enable WindrvXM and WINDRV” checkbox, select the number of drives “1”, click on the “1” in the lower window and select the directory which you want to be able to access from the emulator as a separate drive
- Reboot and press “3” key on numpad.
x68000/editing_and_adding_files_to_hard_disk_images.1417855980.txt.gz · Last modified: 2019/08/27 20:44 (external edit)