Differences

This shows you the differences between two versions of the page.

--- x68000:h.a.r.p_for_mc68000_-_cpu_accelerator_board [2012/01/26 03:11] – eidis
+++ x68000:h.a.r.p_for_mc68000_-_cpu_accelerator_board [2012/02/05 04:52] – eidis
@@ Line 13: / Line 13: @@
 ☆ ☆ ☆ Oh!X Information ☆ ☆ ☆
-H.A.R.P will accelerate the CPU and double its internal clock speed 2x up to 20MHz. But the built-in factory default will remain at 10MHz because it is needed for arbitration. That is, it is working in full-20MHZ when CPU calculates and !!!!! when accessing the external bus is considerably 落Tosane do not have to 10MHz.
+H.A.R.P will accelerate the CPU and double its internal clock from 10MHz to 20MHz. However the factory default system bus speed will remain at 10MHz because it is needed for arbitration. That is, it will work in 20MHz when CPU calculates and in 10MHz when accessing external bus. Therefore, the actual speed increase is only about 10%.
-Therefore, the actual rate of say what happens, "We have only about 10% faster!" Is that it is not.