x68000:internal_hard_drive
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
x68000:internal_hard_drive [2008/10/18 02:00] – computolio | x68000:internal_hard_drive [2009/07/28 20:06] – papa_november | ||
---|---|---|---|
Line 3: | Line 3: | ||
Every model of X68000 (except the original and Compact models) was designed to take an internal hard drive. The internal connector differs between the SASI and SCSI models, but the basic installation is the same. If you have a replacement power supply that sticks into the hard drive bay, you can still install a hard drive in the other half of the case. It'll be very cramped though, and you may want to invest in a solid-state setup. | Every model of X68000 (except the original and Compact models) was designed to take an internal hard drive. The internal connector differs between the SASI and SCSI models, but the basic installation is the same. If you have a replacement power supply that sticks into the hard drive bay, you can still install a hard drive in the other half of the case. It'll be very cramped though, and you may want to invest in a solid-state setup. | ||
- | If you don't already have an internal HD cable, you'll need to make one. The cable is a daisy-chain | + | If you don't already have an internal HD cable, you'll need to make one. The cable has a daisy-chain |
The distance between the two smaller connectors should be about 14CM, and the rest should be as long as you think it needs to be. The first smaller connector goes into the motherboard, | The distance between the two smaller connectors should be about 14CM, and the rest should be as long as you think it needs to be. The first smaller connector goes into the motherboard, | ||
Line 25: | Line 25: | ||
|Seagate ST51080SL | |Seagate ST51080SL | ||
|Conner CFP1060S | |Conner CFP1060S | ||
- | |[[Yamaha V769970]] + [[http:// | + | |[[Yamaha V769970]] + [[http:// |
+ | |[[Yamaha V769970]] + Kingston 1GB CompactFlash Card(W/ | ||
You'll really need to install the SxSI driver if you want to use a SCSI drive on the SASI bus. It is believed that there are drives out there that will work without it, but they' | You'll really need to install the SxSI driver if you want to use a SCSI drive on the SASI bus. It is believed that there are drives out there that will work without it, but they' |
x68000/internal_hard_drive.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1