User Tools

Site Tools


x68000:internal_scsi_and_cf_card_mod

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
x68000:internal_scsi_and_cf_card_mod [2011/12/20 03:10] eidisx68000:internal_scsi_and_cf_card_mod [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 32: Line 32:
 And here is the layout in ExpressPCB format: And here is the layout in ExpressPCB format:
  
-[[http://nfggames.com/X68000/Misc/X68000%20Compact%20SCSI%20adapter.pcb|X68000 Compact SCSI adapter layout]]+[[http://nfggames.com/X68000/schematics/X68000%20Compact%20SCSI%20adapter/X68000%20Compact%20SCSI%20adapter.pcb|X68000 Compact SCSI adapter layout]]
  
 Obviously you have to put the pin headers soldering them on the top layer of the board ( the 30 pin headers downward and the 50 ones faced up) then you have to piggyback the board on the previously installed sockets. Connect a SCSI 50 pin cable from piggyback board to SCSI to IDE adapter and then connect it to the CF to IDE adapter. Click on the following images to enlarge. Obviously you have to put the pin headers soldering them on the top layer of the board ( the 30 pin headers downward and the 50 ones faced up) then you have to piggyback the board on the previously installed sockets. Connect a SCSI 50 pin cable from piggyback board to SCSI to IDE adapter and then connect it to the CF to IDE adapter. Click on the following images to enlarge.
x68000/internal_scsi_and_cf_card_mod.1324314633.txt.gz · Last modified: 2019/08/27 20:44 (external edit)