NFG Games + GameSX

XVI Capacitor List

PCB	µF	V	Height	Width	qty
I/O Board
C202, C204, C207, C226, C201, C260	4.7	50	1.2	0.5	6
C208	47	16	1.2	0.5	1
C210	100	6.3	1.2	0.5	1
C209	100	16	1	0.6	1
C211, C242	100	16	0.8	1.1	2
C217	22	16	0.6	0.5	1
C218	1	50	0.6	0.3	1
C224, C249, C212	100	6.3	1	0.5	3
C225	10	16	1.2	0.5	1
C264, C247, C231, C232	0.47	50	1.2	0.5	4
C243	100	10	0.7	0.6	1
C230	4.7	50	0.7	0.5	1
C227	100	16	1.1	0.6	1
C228	100	16	0.7	0.6	1
C203	4.7	50	0.6	0.5	1
C236	0.47	50	0.6	0.4	1
C237, C238	100	6.3	1.2	0.4	2
C258, C233	1	50	1	0.5	2
C234, C261	100	10	1.1	0.5	2
C259	100	16	1.1	1.1	1
C253, C252	47	16	1.1	0.5	2
Right end of R256 and pin 15 of IC229	47	16	0.7	0.7	1
C235	100	16	0.7	0.7	1
PCB	µF	V	Height	Width	qty
GFX Board
C403, C404, C405	470	10	1.2	0.8	3
C406, C411	100	6.3	1.1	0.5	2
C407, C408, C410	100	16	1.1	0.6	3
PCB	µF	V	Height	Width	qty
Main Mobo Board
C24	220	6.3	1	0.8	1
C16	470	10	1.2	0.8	1
C17	2200	6.3	2	1.3	1
C10	0.47	50	0.7	0.4	1
PCB	µF	V	Height	Width	qty
Riser Board
C801, C802	47	10	0.7	0.7	2
C803, C804	47	16	0.7	0.7	2
PCB	µF	V	Height	Width	qty
1xFloppy Drive
C16, C17	47	16	0.7	0.7	2
C18, C19, C20, C21	10	16	0.7	0.5	4

MISC	µF	V	Height	Width	qty
farthest from the main edge connector	0.47	50	0.7	0.4	1	all negatives on left side, closer to the corner motor
middle	22	16	0.7	0.5	1	there is space for 4mm wide capacitor if you lay it flat
closer to main edge connector	0.1	50	0.7	0.4	1	and mount on back side of board since it's very hard to get them back the normal way