User Tools

Site Tools


x68000:xsimm10_-_memory_expansion_board

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
x68000:xsimm10_-_memory_expansion_board [2012/01/12 10:21] eidisx68000:xsimm10_-_memory_expansion_board [2019/08/27 20:45] (current) – external edit 127.0.0.1
Line 19: Line 19:
 However, due to the vertical size limitations of I/O expansion slots, there are following SIMM module vertical size restrictions: However, due to the vertical size limitations of I/O expansion slots, there are following SIMM module vertical size restrictions:
  
-  *When mounted in slot 1: Less than 15.3mm +  *When mounted in slot 1: Height must be less than 15.3mm 
-  *When mounted in slot 2: Less than 20.4mm+  *When mounted in slot 2: Height must be less than 20.4mm
    
 If the size is exceeded, the adjacent slot is unusable. If the size is exceeded, the adjacent slot is unusable.
Line 32: Line 32:
 SIMM modules with 4MB or 1MB capacity can be used for the first pair. However, do not use 4MB SIMM modules for the second pair.  SIMM modules with 4MB or 1MB capacity can be used for the first pair. However, do not use 4MB SIMM modules for the second pair. 
  
-  *A Pair (Aペア): Each SIMM module can be 4MB or 1MB (You must specify the capacity of installed SIMM modules).  +  *A Pair (Aペア): Both SIMM modules can be 4MB or 1MB (You must specify the capacity of installed SIMM modules).  
-  *B Pair (Bペア): Each SIMM module can be only 1MB+  *B Pair (Bペア): Both SIMM modules can be only 1MB
  
 **Dipswitch settings** **Dipswitch settings**
Line 42: Line 42:
 |  OFF = 1 is displayed on the board  |  S1 and S2 Dipswitch settings as pictured above  | |  OFF = 1 is displayed on the board  |  S1 and S2 Dipswitch settings as pictured above  |
  
-**Here are some examples:**+**Configuration examples**
  
-|{{:x68000:xsimm10_6.jpg?350|}}  |{{:x68000:xsimm10_7.jpg?350|}}  |+|{{:x68000:xsimm10_6_translated.png?350|}}  |{{:x68000:xsimm10_7_translated.png?350|}}  | 
 +|  S1 Dipswitch settings  |  S2 Dipswitch settings  |
  
-Dipswitch settings were taken from the XSIMM10 instruction manual, copyright by Systems Research Inc., Tokyo. +Dipswitch settings were taken from XSIMM10 instruction manual, copyright by Systems Research Ltd., Tokyo. 
  
 Keep the scene alive ! Keep the scene alive !
  
 Eidis Eidis
x68000/xsimm10_-_memory_expansion_board.1326327707.txt.gz · Last modified: 2019/08/27 20:44 (external edit)