Differences

This shows you the differences between two versions of the page.

--- arcade:control_panels [2023/11/29 20:49] – NFG
+++ arcade:control_panels [2023/12/01 17:24] – NFG
@@ Line 15: / Line 15: @@
     * The **depth is different** however: The Sega plate is 14mm, the SNK plate is 10mm.
-==== Sega Aero/Astro City Panel ====
+==== Sega Aero/Astro City v1 Panel ====
 The first two candy-style cabs, Aero City and (New) Astro City from Sega used a 96mm mount, the same as the SNK panel above, but 14mm deep instead of 10mm.
@@ Line 22: / Line 22: @@
 Seimitsu no longer makes this plate, but Sanwa still sells their JLF-P-1S adaptor plate for JLF sticks.
-==== Sega *City VF Panel ====
+==== Sega *City VF v2 Panel ====
-While the Aero and Astro City panels use a large 95mm spacing for their mounts, the VF panels found in later cabs use a much smaller 65mm.  Because of the much smaller span there's no longer space to use the 14mm-deep adaptor plate that brings the stick mechanism closer to the panel.
+While the Aero and Astro City panels use a large 95mm spacing for their mounts, the v2 panels found in later cabs use a much smaller 65mm spacing.  Because of the much smaller span there's no longer space to use the 14mm-deep adaptor plate that brings the stick mechanism closer to the panel.
 {{ :arcade:segavfpanelmount.png?400 |Sega VF Panel Mount}}
 Sanwa JLF sticks will mount directly, using the two opposed screw mounts.  Seimitsu sticks will require either the VF Base, SE Base P=40, or their All-In-One plate.