arcade:sega_city_cabinet_pinouts
Differences
This shows you the differences between two versions of the page.
Next revision | Previous revisionNext revisionBoth sides next revision | ||
arcade:sega_city_cabinet_pinouts [2023/05/02 20:16] – created NFG | arcade:sega_city_cabinet_pinouts [2024/02/03 00:24] – Added 3-pin coin connector NFG | ||
---|---|---|---|
Line 2: | Line 2: | ||
Sega's Astro City, Blast City, Net City and Naomi Universal cabinets use a connector system that's common between them. More or less. They use the AMP/TE Universal Power family of connectors. | Sega's Astro City, Blast City, Net City and Naomi Universal cabinets use a connector system that's common between them. More or less. They use the AMP/TE Universal Power family of connectors. | ||
- | ==== Controllers | + | On all connectors, there is a key that indicates the location of pin #1. For this reason, no attempt has been made below to indicate //plug// or //socket// because it doesn' |
- | {{ : | + | |
+ | === Gender, Pins, Tabs & Sockets | ||
+ | |||
+ | ⚠️ The TE series plastic //plug// uses a //socket// inner connector, and vice versa. | ||
+ | |||
+ | For all of these connectors, the part codes are listed. | ||
+ | |||
+ | ^ Function | ||
+ | ^ Controller | 12 | 176278-1 | ||
+ | ^ Extra Buttons | 10 | 176277-1 | ||
+ | ^ Analogue | 8 | 176275-1 | ||
+ | ^ Video | 15 | 176279-1 | ||
+ | ^ Audio | 4 | 176273-1 | ||
+ | ^ Coin | 3 | 176272-1 | ||
+ | ^ Power Supply | ||
+ | ^ AC Input | 15 | 176279-1 | ||
+ | ^ AC Output | 9 | 176276-1 | ||
+ | ^ Primary DC | 18 | 176280-9 | ||
+ | ^ Secondary DC | 12 | 176280-1 | ||
+ | ^ ^^ ↓ ^ ↓ ^ | ||
+ | | Inner Connectors ^^ Receptacle | ||
+ | ^ 26-22 AWG || 175151-2 | ||
+ | ^ 20-16 AWG || 175152-2 | ||
+ | |||
+ | For the **power supply** sockets, the second part number indicates the panel-mount part. The first number is for cables. | ||
+ | |||
+ | **ProTip:** A very expensive special tool is needed when pins are removed from these connectors. | ||
+ | |||
+ | The last digit of every **plug** or **socket** is the // | ||
+ | |||
+ | ^ Digit ^ Colour | ||
+ | | 1 | Natural | ||
+ | | 2 | Red | | ||
+ | | 4 | Yellow | ||
+ | | 6 | Blue | | ||
+ | | 9 | Black | | ||
+ | |||
+ | ===== Control Input ===== | ||
+ | |||
+ | ==== Primary Controls ==== | ||
+ | The 12-pin connector carries most of the player' | ||
+ | |||
+ | |||
+ | {{: | ||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | Start | 5 | Down | 9 | Button 4 | | ||
+ | | 2 | Right | 6 | Button 1 | 10 | Button 5 | | ||
+ | | 3 | Left | 7 | Button 2 | 11 | +5V | | ||
+ | | 4 | Up | 8 | Button 3 | 12 | Ground | | ||
+ | |||
+ | |||
+ | Buttons 4-6 (4-7 for Net City & Naomi) can be found on the extra buttons connector (aka kick harness). | ||
+ | |||
+ | ===== Extra Buttons ===== | ||
+ | |||
+ | The extra button connector changed when the Net City, New Net City and Naomi Universal cabinets came out. The //ground// pin was moved from 4 to 5, and //button 7// was added on pin 4. And in order to prevent confusion, the connector was changed from 10 to 15 pins. The third row is unused. | ||
+ | |||
+ | Note that, at least on a **New Astro City**, it seems the connector is fully populated in the cabinet, and runs straight through from panel to board. | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ==== Astro & Blast City ==== | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | P1 Button 4| 6 | P2 Button 5 | | ||
+ | | 2 | P1 Button 5 | 7 | P2 Button 6 | | ||
+ | | 3 | P1 Button 6 | 8 | Ground | | ||
+ | | 4 | Ground | 9 | N/C | | ||
+ | | 5 | P2 Button 4 | 10 | N/C | | ||
+ | |||
+ | ==== Net City & Naomi Universal ==== | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | P1 Button 4| 6 | P2 Button 4 | 11 | +12V | | ||
+ | | 2 | P1 Button 5 | 7 | P2 Button 5 | 12 | +5V | | ||
+ | | 3 | P1 Button 6 | 8 | P2 Button 6 | 13 | +5V | | ||
+ | | 4 | P1 Button 7| 9 | P2 Button 7 | 14 | Ground | ||
+ | | 5 | Ground | 10 | Ground | 15 | Ground | ||
+ | |||
+ | ===== Analogue Input ===== | ||
+ | There are two of these connectors, one for each player. | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | V-Ref | 5 | Channel 2 | | ||
+ | | 2 | V-Ref | 6 | Channel 3 | | ||
+ | | 3 | Channel 0 | 7 | Ground | | ||
+ | | 4 | Channel 1 | 8 | Ground | | ||
+ | |||
+ | ===== Video ===== | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | Red | 6 | AC Live | 11 | N/C | | ||
+ | | 2 | Green | 7 | AC Neutral | 12 | N/C | | ||
+ | | 3 | Blue | 8 | N/C| 13 | N/C | | ||
+ | | 4 | Sync | 9 | Demag | 14 | N/C | | ||
+ | | 5 | Ground | 10 | Demag | 15 | N/C | | ||
+ | |||
+ | ===== Audio ===== | ||
+ | Sega used the same connector with two different pinouts, depending on the audio function. | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | ^ Speaker | ||
+ | | 1 | Left + | 3 | Right + | | ||
+ | | 2 | Left - | 4 | Right - | | ||
+ | ^ Amplifier | ||
+ | | 1 | Left + | 3 | Left - | | ||
+ | | 2 | Right - | 4 | Right + | | ||
+ | |||
+ | Though every *City cab had stereo speakers, the default audio arrangement supported only monaural sound. | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Mono Jumper | ||
+ | | 1 | Left + | 3 | to pin 2 | | ||
+ | | 2 | to pin 3 | 4 | Right - | | ||
+ | ===== Power Supply ===== | ||
+ | For the Astro and Blast City cabs, the power supplies didn't change much. The Net City and Naomi cabs were very different. | ||
+ | |||
+ | ==== AC Input ==== | ||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | Frame Ground | 6 | N/C | 11 | Demag | | ||
+ | | 2 | Frame Ground | 7 | N/C | 12 | N/C | | ||
+ | | 3 | Frame Ground | 8 | N/C| 13 | Demag | | ||
+ | | 4 | N/C | 9 | N/C | 14 | N/C | | ||
+ | | 5 | AC Neutral | 10 | N/C | 15 | AC Live | | ||
+ | |||
+ | ==== AC Output ==== | ||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | AC Live | 4 | N/C | 7 | AC Neutral | ||
+ | | 2 | AC Live | 5 | N/C | 8 | AC Neutral | ||
+ | | 3 | AC Live | 6 | N/C | 9 | AC Neutral | ||
+ | |||
+ | ==== Primary DC ==== | ||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | +12V | 7 | +12V | 13 | +12V | | ||
+ | | 2 | Ground | 8 | Ground | 14 | Ground | ||
+ | | 3 | +5V | 9 | Ground | 15 | Test | | ||
+ | | 4 | +5V | 10 | +5V | 16 | +Speaker In | | ||
+ | | 5 | -5V | 11 | +5V | 17 | +Speaker Out | | ||
+ | | 6 | Service | 12 | -Speaker In | 18 | -Speaker Out | | ||
+ | |||
+ | ==== Secondary DC ==== | ||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | +5V | 5 | +5V | 9 | +5V | | ||
+ | | 2 | +5V | 6 | +5V | 10 | +5V | | ||
+ | | 3 | Ground | 7 | Ground | 11 | Ground | | ||
+ | | 4 | Ground | 8 | Ground | 12 | +12V | | ||
+ | |||
+ | ===== Coin Counter ===== | ||
+ | |||
+ | For some reason the coin counter must be connected in order for the coin slot/coin input to work, because the ground line to the coin slot goes through the counter. | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | +5V | 3 | Coin Counter | | ||
+ | | 2 | GND in | 4 | GND to coin | | ||
+ | |||
+ | |||
+ | ===== JVS Power ===== | ||
+ | |||
+ | Sega's JVS board, found in the New Net City and Naomi Universal cabs, uses both 5V and 12V. If you're putting one in an Astro City, the standard PSU has an unused output connector that provides an easy source for both. The 8-pin power plug pinout for the JVS is: | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | 5V | 5 | Ground | ||
+ | | 2 | 5V | 6 | Ground | ||
+ | | 3 | 12V | 7 | Ground | ||
+ | | 4 | 12V | 8 | Ground | ||
+ |
arcade/sega_city_cabinet_pinouts.txt · Last modified: 2024/02/03 00:32 by NFG