Differences

This shows you the differences between two versions of the page.

--- arcade:sega_city_cabinet_pinouts [2023/05/26 17:09] – Corrected part number (oops) NFG
+++ arcade:sega_city_cabinet_pinouts [2023/06/14 11:46] – [Coin Counter] NFG
@@ Line 77: / Line 77: @@
 ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^
-|  1  | P1 Button 4|  6  | P2 Button 4 |  11  |  NC  |
+|  1  | P1 Button 4|  6  | P2 Button 4 |  11  |  +12V  |
-|  2  | P1 Button 5 |  7  | P2 Button 5 |  12  |  NC  |
+|  2  | P1 Button 5 |  7  | P2 Button 5 |  12  |  +5V  |
-|  3  | P1 Button 6 |  8  | P2 Button 6 |  13  |  NC  |
+|  3  | P1 Button 6 |  8  | P2 Button 6 |  13  |  +5V  |
-|  4  | P1 Button 7|  9  | P2 Button 7 |    14  |  NC  |
+|  4  | P1 Button 7|  9  | P2 Button 7 |    14  |  Ground  |
-|  5  | Ground |  10  | Ground |  15  |  NC  |
+|  5  | Ground |  10  | Ground |  15  |  Ground  |
 ===== Analogue Input =====
@@ Line 175: / Line 175: @@
 |  1  | +5V |  3  | Coin Counter |
 |  2  | GND in |  4  | GND to coin |
+===== JVS Power =====
+Sega's JVS board, found in the New Net City and Naomi Universal cabs, uses both 5V and 12V.  If you're putting one in an Astro City, the standard PSU has an unused output connector that provides an easy source for both.  The 8-pin power plug pinout for the JVS is:
+{{:arcade:amp-8.png?150 | }}
+^ Pin ^ Function ^ Pin ^ Function ^
+|  1  |  5V  |  5  |  Ground  |
+|  2  |  5V  |  6  |  Ground  |
+|  3  |  12V  |  7  |  Ground  |
+|  4  |  12V  |  8  |  Ground  |