arcade:sega_city_cabinet_pinouts
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
arcade:sega_city_cabinet_pinouts [2023/05/26 17:09] – Corrected part number (oops) NFG | arcade:sega_city_cabinet_pinouts [2023/10/12 17:03] – Fixed part no for 12pin plug NFG | ||
---|---|---|---|
Line 6: | Line 6: | ||
=== Gender, Pins, Tabs & Sockets === | === Gender, Pins, Tabs & Sockets === | ||
- | Somewhat confusingly, | + | ⚠️ The TE series plastic |
For all of these connectors, the part codes are listed. | For all of these connectors, the part codes are listed. | ||
^ Function | ^ Function | ||
- | ^ Controller | 12 | | + | ^ Controller | 12 | |
^ Extra Buttons | 10 | 176277-1 | ^ Extra Buttons | 10 | 176277-1 | ||
^ Analogue | 8 | 176275-1 | ^ Analogue | 8 | 176275-1 | ||
Line 21: | Line 21: | ||
^ Primary DC | 18 | 176280-9 | ^ Primary DC | 18 | 176280-9 | ||
^ Secondary DC | 12 | 176280-1 | ^ Secondary DC | 12 | 176280-1 | ||
- | ^ | + | ^ ^^ |
- | ^ | + | | Inner Connectors ^^ Receptacle |
- | ^ | + | ^ |
+ | ^ | ||
**ProTip:** A very expensive special tool is needed when pins are removed from these connectors. | **ProTip:** A very expensive special tool is needed when pins are removed from these connectors. | ||
Line 77: | Line 78: | ||
^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
- | | 1 | P1 Button 4| 6 | P2 Button 4 | 11 | | + | | 1 | P1 Button 4| 6 | P2 Button 4 | 11 | |
- | | 2 | P1 Button 5 | 7 | P2 Button 5 | 12 | | + | | 2 | P1 Button 5 | 7 | P2 Button 5 | 12 | |
- | | 3 | P1 Button 6 | 8 | P2 Button 6 | 13 | | + | | 3 | P1 Button 6 | 8 | P2 Button 6 | 13 | |
- | | 4 | P1 Button 7| 9 | P2 Button 7 | 14 | | + | | 4 | P1 Button 7| 9 | P2 Button 7 | 14 | |
- | | 5 | Ground | 10 | Ground | 15 | | + | | 5 | Ground | 10 | Ground | 15 | |
===== Analogue Input ===== | ===== Analogue Input ===== | ||
Line 175: | Line 176: | ||
| 1 | +5V | 3 | Coin Counter | | | 1 | +5V | 3 | Coin Counter | | ||
| 2 | GND in | 4 | GND to coin | | | 2 | GND in | 4 | GND to coin | | ||
+ | |||
+ | |||
+ | ===== JVS Power ===== | ||
+ | |||
+ | Sega's JVS board, found in the New Net City and Naomi Universal cabs, uses both 5V and 12V. If you're putting one in an Astro City, the standard PSU has an unused output connector that provides an easy source for both. The 8-pin power plug pinout for the JVS is: | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | 5V | 5 | Ground | ||
+ | | 2 | 5V | 6 | Ground | ||
+ | | 3 | 12V | 7 | Ground | ||
+ | | 4 | 12V | 8 | Ground | ||
+ | |||
arcade/sega_city_cabinet_pinouts.txt · Last modified: 2024/02/03 00:32 by NFG