User Tools

Site Tools


av:csy-2100

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
av:csy-2100 [2009/01/03 05:00] rgb32eav:csy-2100 [2010/02/13 13:10] rgb32e
Line 10: Line 10:
 The SCART RGB connector on the CSY-2100 is wired to the Standard SCART specification.  However, only RGBS and ground pins are used (audio and mode setting pins are not connected).  Like stated above both composite video or composite sync can be used on pin 20. The SCART RGB connector on the CSY-2100 is wired to the Standard SCART specification.  However, only RGBS and ground pins are used (audio and mode setting pins are not connected).  Like stated above both composite video or composite sync can be used on pin 20.
  
-===== Variable Resistor Descriptions and default values =====+===== Variable Resistors (Internal Adjustments) =====
 There are 6 variable resistors inside the CSY-2100.  This section will be updated upon determination of VR function and factory value. There are 6 variable resistors inside the CSY-2100.  This section will be updated upon determination of VR function and factory value.
  
Line 21: Line 21:
 |6| TBD | TBD | |6| TBD | TBD |
  
-===== Pictures (with Cables - short SNES RGB Lead): ===== +===== External Picture ===== 
 +  * Shortened SNES SCART Lead with External Audio
 {{:av:csy2100_00.jpg|}} {{:av:csy2100_00.jpg|}}
  
-===== Internal Pictures=====+{{:av:snes_shortrgb_scart_00.jpg|}} 
 + 
 +===== Internal Pictures =====
  
 {{:av:csy2100_01.jpg|}} {{:av:csy2100_01.jpg|}}
av/csy-2100.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1