av:japanese_rgb-15
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
av:japanese_rgb-15 [2016/05/30 15:33] – Added intro about the Ys line. lawrence | av:japanese_rgb-15 [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 59: | Line 59: | ||
* Not all systems put out power on pin 7. Normally +5v, some devices (like the X-RGB2) leave this pin disconnected. | * Not all systems put out power on pin 7. Normally +5v, some devices (like the X-RGB2) leave this pin disconnected. | ||
* Remember that the pin numbers are almost always found on the connector itself. | * Remember that the pin numbers are almost always found on the connector itself. | ||
+ | * CRITICAL: H and V sync are TTL level (5Vpp) If you make a SCART cable and tie pins together, you must use a resistor (470ohm - NOT CONFIRMED) to lower voltages to safe levels for 75ohm / 0.3Vpp CSYNC or else you’ll damage the X68K or your display device (eg XRGB mini) | ||
---- | ---- | ||
**Credit:** | **Credit:** | ||
* Some of this info came from [[http:// | * Some of this info came from [[http:// |
av/japanese_rgb-15.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1