Differences

This shows you the differences between two versions of the page.

--- av:nintendodigitalav [2009/01/24 05:49] – Link83
+++ av:nintendodigitalav [2023/05/26 08:44] (current) – Link83
@@ Line 2: / Line 2: @@
 The DigitalAV connector carries digital sound and digital component video.  Neither signal is useful by itself; the Nintendo component cable converts the digital to analogue component, and a chip is required to convert the digital audio to a usable format (TOSlink, etc).  Special thanks to **Oscar** for this information.
-There are other pages detailing the [[nintendoGCRGB|GameCube RGB + VGA]] and [[nintendoGCDA|Digital Audio]] mods on this wiki.
+There are other pages detailing the [[gamecube_rgb|GameCube RGB + VGA]] and [[nintendoGCDA|Digital Audio]] mods on this wiki.
 <box warning round|Caveats>
@@ Line 15: / Line 15: @@
 ^ Pin ^ Signal ^ Pin ^ Signal ^
 ^  1 | DetectCable (pull high 1.8V)  |  2 | 54MHz Clock  |
-^  3 | ClkSelect(C10)  |  4 | GND  |
+^  3 | ClkSelect(CP10)  |  4 | GND  |
-^  5 | +12V  |  6 | 27Mhz Clock  |
+^  5 | +12V  |  6 | 27MHz Clock  |
 ^  7 | VDATA0 (CP09)  |  8 | GND  |
 ^  9 | VDATA1 (CP08)  |  10 | VDATA2 (CP07)  |
@@ Line 22: / Line 22: @@
 ^  13 | VDATA4 (CP04)  |  14 | GND  |
 ^  15 | VDATA5 (CP03)  |  16 | VDATA6 (CP02)  |
-^  17 | +3.3v  |  18 | VDATA7 (CP01)  |
+^  17 | +3.3V  |  18 | VDATA7 (CP01)  |
 ^  19 | LRCK (Audio)  |  20 | GND  |
 ^  21 | Data (Audio)  |  22 | BCLK (Audio)  |