av:scart2rgb
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
av:scart2rgb [2005/12/17 22:41] – Added image, clarified caveats. nfg | av:scart2rgb [2006/10/30 21:47] – Added power link 210.49.242.31 | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ===== RGB / SCART Adaptors ===== | + | ===== RGB / SCART Adaptors ===== |
+ | {{skill> | ||
Being in a PAL land now (Australia) I'm suddenly aware of a need for a definitive solution for converting RGB to SCART for blissfully clear gaming love. Here then is how I did it: | Being in a PAL land now (Australia) I'm suddenly aware of a need for a definitive solution for converting RGB to SCART for blissfully clear gaming love. Here then is how I did it: | ||
Line 23: | Line 24: | ||
* I used +5v for blanking, but you may need to use a 100Ohm resistor on this line. | * I used +5v for blanking, but you may need to use a 100Ohm resistor on this line. | ||
* Ground is Ground, you don't have to use separate wires from end to end. One ground line is enough, but you must connect ALL the ground pins to each other on each end. | * Ground is Ground, you don't have to use separate wires from end to end. One ground line is enough, but you must connect ALL the ground pins to each other on each end. | ||
+ | * If you're connecting your display to a console or device that doesn' | ||
av/scart2rgb.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1