Differences

This shows you the differences between two versions of the page.

--- controls:x686button [2009/12/04 07:19] – TheRogue
+++ controls:x686button [2009/12/04 07:22] – TheRogue
@@ Line 27: / Line 27: @@
 {{:x68000:mdcontrollermod.jpg|}}
-Step 3: Cut the black (#1), grey (#7), and white (#9) wires directly in the middle, so an equal length remains on both sides. I will now refer to the half of the wire connected to the white connector as the "controller side" and the half of the wire connected to the cable as the "cable side".
+Step 3: Cut the black (#1), grey (#7), and white (#9) wires directly in the middle, so an equal length remains on both sides. From now on the half of the wire connected to the white connector will be referred to as the "controller side" and the half of the wire connected to the cable as the "cable side".
 Step 4: Re-connect the wires in the following way: