preface:why_x68000_s_caps_are_almost_broken
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
| preface:why_x68000_s_caps_are_almost_broken [2014/09/16 17:56] – [EXPERT,SUPER,XVI,030 (SH4 Unit)] eidis | preface:why_x68000_s_caps_are_almost_broken [2014/09/16 20:21] – [EXPERT,SUPER,XVI,030 (SH4 Unit)] eidis | ||
|---|---|---|---|
| Line 26: | Line 26: | ||
| ====== EXPERT, | ====== EXPERT, | ||
| - | |X68 power supply part number | + | All info taken from: http:// |
| - | |F1 |125V 4A fuse |(MZ) smaller | + | |
| - | |ZD31 |RD6.8EB | + | |Part number |
| - | |ZD32 |RD4.3EB | + | |F1 |125V 4A fuse |(MZ) small type | |
| - | |ZD51 |RD15EB etc. |15V Zener diode | | + | |ZD31 |
| - | |PC31, PC51 |PC8170, TLP521-1 | + | |ZD32 |
| - | |PC52 |S12MD1, TLP541G | + | |ZD51 |[[http:// |
| - | |Q31 |2SC2333 / 2SC2335 | + | |PC31, PC51 |
| - | |Q32, Q33, Q53 |2SC1815Y | + | |PC52 |[[http:// |
| - | |C9 |105 ℃ etc. 200V470μF |It does not fit in case board and not mounting height: 41mm or less in diameter | + | |Q31 |[[http:// |
| - | |C24 |25V1000μF 105 ℃ | + | |Q32, Q33, Q53 |
| - | |C25 |It might be using the 25V of 105 ℃ ↑ 16V1000μF |Genuine: 16V680μF | | + | |C9 |200V 470μF |Original: 180V 470μF. Height must not exceed |
| - | |C27 |25V220μF 105 ℃ |Genuine: 25V120μF | | + | |C24 |25V 1000μF | | |
| - | |C28 |105 ℃ (OS-CON Allowed) 16V100μF | | | + | |C25 |16V 1000μF |Original: 16V 680μF (25V can also be used) | |
| - | |C31 |105 ℃ (OS-CON Allowed) 16V100μF |Genuine: 10V100μF | | + | |C27 |25V 220μF |Original: 25V 120μF | |
| - | |C33 |16V220μF 105 ℃ | + | |C28 |16V 100μF | | |
| - | |C34 |10V100μF 105 ℃ |Genuine: There information is acceptable if OS-CON 10V100μF of 6.3V100μF SS series (6.3mm × 9.8mm) provide information RUN's. Availability of OS-CON XPS inventory be mounted diagonally References | + | |C31 |16V 100μF |Original: 10V 100μF | |
| - | |C35 |50V10μF 105 ℃ |Genuine: 25V10μF | | + | |C33 |16V 220μF |Optional: 25V can also be used | |
| - | |C38 |50V3.3μF 105 ℃ | + | |C34 |10V 100μF |Original: 6.3V 100μF | |
| - | |C40, C41 |16V6800μF 105 ℃ |Genuine: 10V5600μF | | + | |C35 |50V 10μF |Original: 25V 10μF | |
| - | |C42 |10V2200μF 105 ℃ |Genuine: 6.3V2200μF | | + | |C38 |50V 3.3μF | | |
| - | |R33, R34 |100Ω 1 / 6W metallization new small | + | |C40, C41 |16V 6800μF |Original: 10V 5600μF | |
| - | |R35 |3Ω 1 / 4W metal coating | + | |C42 |10V 2200μF |Original: 6.3V 2200μF | |
| - | |R40 |2KΩ 1 / 6W metal coating | + | |R33, R34 |100Ω 1/6W | | |
| - | |R98 |2.2KΩ 1 / 4W metallization new small |Genuine: 1 / 6W | | + | |R35 |3Ω 1/4W |Original: 3.3Ω | |
| - | |2pinFAN connector | + | |R40 |2KΩ 1/6W | | |
| - | |2pinFAN connector terminal | + | |R98 |2.2KΩ 1/4W |Original: 1/6W | |
| - | |Connector to the lower substrate (EXPERT system [EXPERT2 / SUPER / XVI / 030]) |JST VHR-6N | + | |
| - | |Connector to the main board |(Possibility of Yu 5195-02) Molex 5239-02 | + | |
| - | |FDD · HDD connector | + | |
| ====== PRO ====== | ====== PRO ====== | ||
| ====== Compact XVI,030 Compact ====== | ====== Compact XVI,030 Compact ====== | ||
preface/why_x68000_s_caps_are_almost_broken.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1