x68000:cz-6bs1_-_genuine_sharp_scsi_board
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
x68000:cz-6bs1_-_genuine_sharp_scsi_board [2011/12/11 02:06] – eidis | x68000:cz-6bs1_-_genuine_sharp_scsi_board [2011/12/12 00:44] – eidis | ||
---|---|---|---|
Line 42: | Line 42: | ||
*The SCSI interface and X68000 integrated SASI interface, except for the CZ-623C, is different and SCSI interface is seen by Human68k as another interface that can interchange data betwean both interfaces. Devices which are connected to SASI interface and those which are connected to SCSI have different representation ID's. For example, SASI (HD0 - HD15) and SCSI (SCSI0 - SCSI7). Device may be marked with ID that it represents. | *The SCSI interface and X68000 integrated SASI interface, except for the CZ-623C, is different and SCSI interface is seen by Human68k as another interface that can interchange data betwean both interfaces. Devices which are connected to SASI interface and those which are connected to SCSI have different representation ID's. For example, SASI (HD0 - HD15) and SCSI (SCSI0 - SCSI7). Device may be marked with ID that it represents. | ||
*ID numbers for SCSI and SASI devices differ and they are physically different interfaces. As described above, SASI can handle up to 16 devices, SCSI can handle up to a maximum of 7 devices. A maximum of 23 devices can be connected in total. | *ID numbers for SCSI and SASI devices differ and they are physically different interfaces. As described above, SASI can handle up to 16 devices, SCSI can handle up to a maximum of 7 devices. A maximum of 23 devices can be connected in total. | ||
- | This device | + | This board was used without problems even after connecting the same amount of devices to SCSI and SASI interface |
**4. Names and handling procedures** | **4. Names and handling procedures** | ||
Line 48: | Line 48: | ||
4-1 Names of Parts | 4-1 Names of Parts | ||
- | {{: | + | {{: |
- | Switch JP1 jumper setting on the switch on hoard 4-2, JP2 interrupt priority level 2 and 4 as 68000MP ∪ He interrupts (from the I / 0 Surotsuto are two levels available) Set whether to use either This switch is used to. The included software interrupt processing in the setting of the switch so jacket does not use is optional. (Factory default is set to level 2 for a bottle.) | + | 4-2 Jumper settings |
- | If you own a software interrupt processing is set as follows. | + | |
- | Set the priority level of the interrupt request signal switch jacket JP2, set the interrupt priority level of the signal allowed by the jacket Switch JP1. The priority level can be selected as a Level 2 or Level 4. | + | |
- | | |JP1 Setting | + | Jumpers |
- | |If you use a Level 2 |1-2 jumper inserted between | + | Set the priority level of the interrupt request signal with jumper |
- | |If you use four Rebaru | + | |
- | Kyung-level priority interrupt request signal will be activated and allowed is set to the same level. | + | | | JP1 | JP2 | |
- | At level 2 interrupt request level, such as how to use it at level 4 and level interrupt is not allowed. | + | | Level 2 |
+ | | Level 4 | ||
- | Attached | + | Kernel-level priority interrupt request signal will be activated and allowed signal will be set to the same level. |
- | CZ is already for sale ※-6BE2, CZ-6BE4, CZ-6BF1, CZ-6BM1, CZ-6BP1, CZ-board and 6BC1 (CZ-6BS1) If the combination is, I make sure before you install this board Please attach to / O slot 1. | + | Both jumpers must be set at the same level. |
- | (CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2, CZ-board such as 6BN1 is in relation to the connector, in conjunction with this board please note that you can.) | + | |
- | ● CZ-652C, CZ-653C, CZ-662C, CZ-663C | + | 4-3 Compatible |
- | The board that use of the ※ I / O slot cover, | + | |
- | However, for the computer (CZ-600C, CZ-601C, CZ-611C, CZ-602C, CZ-612C, CZ-603C, CZ-for 613C) I / O slot cover, | + | *When used in tower models such as CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C |
+ | *For desktop models such as CZ-652C, CZ-653C, CZ-662C, CZ-663C please | ||
" | " | ||
- | {{: | + | {{: |
x68000/cz-6bs1_-_genuine_sharp_scsi_board.txt · Last modified: 2019/08/27 20:45 by 127.0.0.1