x68000:doscall
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
x68000:doscall [2017/09/10 12:22] – added _FFLUSH, _CHGDRV neko68k | x68000:doscall [2017/09/11 04:04] – added _GETSS neko68k | ||
---|---|---|---|
Line 2: | Line 2: | ||
===== DOS Call List ===== | ===== DOS Call List ===== | ||
+ | Caution: Calls to $FF00~$FF7F in Human68k Version 2 have been moved | ||
+ | to $FF80~$FFAF in Version 3 and later | ||
+ | |||
+ | | ||
+ | | ||
+ | $FFF8 is called every time a thread is deleted. | ||
^Code^Name^Description^ | ^Code^Name^Description^ | ||
Line 7: | Line 13: | ||
|$FF01|[[doscall# | |$FF01|[[doscall# | ||
|$FF02|[[doscall# | |$FF02|[[doscall# | ||
- | |$FF03|_COMINP|RS-232C 1 byte input| | + | |$FF03|[[doscall# |
- | |$FF04|_COMOUT|RS-232C 1 byte output| | + | |$FF04|[[doscall# |
|$FF05|_PRNOUT|Printer 1 character output| | |$FF05|_PRNOUT|Printer 1 character output| | ||
|$FF06|_INPOUT|Character I/O| | |$FF06|_INPOUT|Character I/O| | ||
Line 28: | Line 34: | ||
|$FF17|_FATCHK|File concatenation state check| | |$FF17|_FATCHK|File concatenation state check| | ||
|$FF18|_HENDSP|Kanji conversion control| | |$FF18|_HENDSP|Kanji conversion control| | ||
- | |$FF19|_CURDRV|Get current drive| | + | |$FF19|[[[doscall# |
- | |$FF1A|_GETSS|Get character string (no break check)| | + | |$FF1A|[[doscall# |
|$FF1B|[[doscall# | |$FF1B|[[doscall# | ||
|$FF1C|[[doscall# | |$FF1C|[[doscall# | ||
- | |$FF1D|_FPUTC|Write one character to file| | + | |$FF1D|[[doscall# |
- | |$FF1E|_FPUTS|Write string to file| | + | |$FF1E|[[doscall# |
- | |$FF1F|_ALLCLOSE|Close all files| | + | |$FF1F|[[doscall# |
^Code^Name^Description^ | ^Code^Name^Description^ | ||
- | |$FF20|_SUPER|Supervisor/ | + | |$FF20|[[doscall# |
|$FF21|_FNCKEY|Get/ | |$FF21|_FNCKEY|Get/ | ||
|$FF22|_KNJCTRL|Kana-to-kanji conversion| | |$FF22|_KNJCTRL|Kana-to-kanji conversion| | ||
Line 55: | Line 61: | ||
^Code^Name^Description^ | ^Code^Name^Description^ | ||
- | |$FF30|_VERNUM|Get OS version| | + | |$FF30|[[doscall# |
|$FF31|_KEEPPR|Terminate and stay resident| | |$FF31|_KEEPPR|Terminate and stay resident| | ||
|$FF32|_GETDPB|Get drive parameter block| | |$FF32|_GETDPB|Get drive parameter block| | ||
Line 61: | Line 67: | ||
|$FF34|_DRVXCHG|Replace drive| | |$FF34|_DRVXCHG|Replace drive| | ||
|$FF35|_INTVCG|Get vector processing address| | |$FF35|_INTVCG|Get vector processing address| | ||
- | |$FF36|_DSKFRE|Get disk space remaining| | + | |$FF36|[[doscall# |
|$FF37|_NAMECK|Filename expansion| | |$FF37|_NAMECK|Filename expansion| | ||
|$FF39|[[doscall# | |$FF39|[[doscall# | ||
Line 84: | Line 90: | ||
|$FF4A|[[doscall# | |$FF4A|[[doscall# | ||
|$FF4B|_EXEC|Load/ | |$FF4B|_EXEC|Load/ | ||
- | |$FF4C|_EXIT2|Exit with return code| | + | |$FF4C|[[doscall# |
- | |$FF4D|_WAIT|Get process end return code| | + | |$FF4D|[[doscall# |
|$FF4E|_FILES|Search files| | |$FF4E|_FILES|Search files| | ||
|$FF4F|_NFILES|Search next files| | |$FF4F|_NFILES|Search next files| | ||
Line 99: | Line 105: | ||
|$FF87|_FILEDATE|Get/ | |$FF87|_FILEDATE|Get/ | ||
|$FF88|_MALLOC2|Alloc memory| | |$FF88|_MALLOC2|Alloc memory| | ||
- | |$FF8A|_MAKETMP|Create temporary file| | + | |$FF8A|[[doscall# |
- | |$FF8B|_NEWFILE|Create new file| | + | |$FF8B|[[doscall# |
|$FF8C|_LOCK|Lock file| | |$FF8C|_LOCK|Lock file| | ||
|$FF8F|_ASSIGN|Get/ | |$FF8F|_ASSIGN|Get/ | ||
Line 129: | Line 135: | ||
|$FFFE|_TIME_PR|Get timer counter value| | |$FFFE|_TIME_PR|Get timer counter value| | ||
|$FFFF|_CHANGE_PR|Execution right abandonment(? | |$FFFF|_CHANGE_PR|Execution right abandonment(? | ||
- | |||
- | | ||
- | to $FF80~$FFAF in Version 3 and later | ||
- | |||
- | | ||
- | | ||
- | $FFF8 is called every time a thread is deleted. | ||
============================================================================== | ============================================================================== | ||
Line 197: | Line 196: | ||
DOS _PUTCHAR | DOS _PUTCHAR | ||
addq.l # | addq.l # | ||
+ | --- | ||
+ | ^$FF03^< | ||
+ | |Arg|None|| | ||
+ | |Return|1 byte received|| | ||
+ | |Receive 1 byte from the RS-232C port (with break check)||| | ||
+ | --- | ||
+ | ^$FF04^< | ||
+ | |Arg|CODE.w|Byte code| | ||
+ | |Return|None|| | ||
+ | |Send 1 byte to the RS-232C port (with break check)||| | ||
+ | |||
+ | Usage: | ||
+ | move CODE, | ||
+ | DOS _COMOUT | ||
+ | addq.l # | ||
+ | |||
--- | --- | ||
^$FF07^< | ^$FF07^< | ||
Line 248: | Line 263: | ||
DOS _CHGDRV | DOS _CHGDRV | ||
addq.l # | addq.l # | ||
+ | --- | ||
+ | ^$FF19^< | ||
+ | |Arg|None|| | ||
+ | |Return|Number of the current drive (0: A 1: B ... 25: Z)|| | ||
+ | |Get the current drive number.||| | ||
--- | --- | ||
+ | ^$FF1A^< | ||
+ | |Arg|BUFFER.l|Input buffer pointer| | ||
+ | |Return|Writes the input character string up to the line feed to the input buffer specified by BUFFER. Newline characters are replaced with NULL characters. Does not perform break check(do not break at VOID/ | ||
+ | |Get the current drive number.||| | ||
+ | |||
+ | ^Offset^Size^Desciption^ | ||
+ | |0|1.b|Maximum input characters allowed: n| | ||
+ | |1|1.b|Number of characters actually entered| | ||
+ | |2|n+1.b|Input string| | ||
+ | --- | ||
+ | |||
+ | |||
^$FF1B^< | ^$FF1B^< | ||
|Arg|FILENO.w|File handle| | |Arg|FILENO.w|File handle| | ||
Line 271: | Line 303: | ||
DOS _FGETS | DOS _FGETS | ||
addq.l # | addq.l # | ||
+ | --- | ||
+ | ^$FF1D^< | ||
+ | |Arg 1|CODE.w|Byte code| | ||
+ | |Arg 2|FILENO.w|File handle| | ||
+ | |Return|None|| | ||
+ | |Write 1 byte from CODE to the file specified by FILENO.||| | ||
+ | move FILENO, | ||
+ | move CODE, | ||
+ | DOS _FPUTC | ||
+ | addq.l # | ||
+ | --- | ||
+ | ^$FF1E^< | ||
+ | |Arg 1|MESPTR.l|Pointer to string| | ||
+ | |Arg 2|FILENO.w|File handle| | ||
+ | |Return|None|| | ||
+ | |Write the string pointed to by MESPTR to the file specified in FILENO. Does not output the NULL character at the end of the string.||| | ||
+ | |||
+ | Usage: | ||
+ | move FILENO, | ||
+ | pea (MESPTR) | ||
+ | DOS _FPUTS | ||
+ | addq.l # | ||
+ | --- | ||
+ | ^$FF1F^< | ||
+ | |Arg|None|| | ||
+ | |Return|None|| | ||
+ | |Close all open files||| | ||
+ | --- | ||
+ | ^$FF20^< | ||
+ | |Arg|STACK.l|Switching mode (0 or address set in SSP)| | ||
+ | |Return|STACK=0 Value of the previous SSP (error code if negative) \\ Switch the supervisor/ | ||
+ | |Close all open files||| | ||
+ | |||
+ | Usage: | ||
+ | pea (STACK) | ||
+ | DOS _SUPER | ||
+ | addq.l # | ||
+ | --- | ||
+ | ^$FF30^< | ||
+ | |Arg|None|| | ||
+ | |Return|Version number|| | ||
+ | |Check the verion number of Human68k \\ \\ bit 31~24 ' | ||
+ | --- | ||
+ | ^$FF36^< | ||
+ | |Arg|DRIVE.w|Drive number| | ||
+ | |Return|Number of free bytes (2GB maximum, error code if negative)|| | ||
+ | |Get the remaining free space of the drive specified by DRIVE and write it to the following 8 bytes to BUFFER.||| | ||
+ | |||
+ | ^Offset^Size^Description^ | ||
+ | |0|1.w|Number of free clusters| | ||
+ | |2|1.w|Total number of clusters| | ||
+ | |4|1.w|Number of sectors per cluster| | ||
+ | |6|1.w|Number of bytes per sector| | ||
+ | |||
+ | Usage: | ||
+ | pea (BUFFER) | ||
+ | move DRIVE, | ||
+ | DOS _DSKFRE | ||
+ | addq.l # | ||
--- | --- | ||
^$FF39^< | ^$FF39^< | ||
Line 432: | Line 523: | ||
DOS _SETBLOCK | DOS _SETBLOCK | ||
addq.l # | addq.l # | ||
+ | |||
+ | --- | ||
+ | ^$FF4C^< | ||
+ | |Arg|CODE.w|Exit code| | ||
+ | |Return|None|| | ||
+ | |Quit the program with the exit code specified by CODE. The opened file handles are closed.||| | ||
+ | |||
+ | --- | ||
+ | ^$FF4D^< | ||
+ | |Arg|None|| | ||
+ | |Return|Exit code|| | ||
+ | |Examine the exit code of the executed process. It is the same as the return value of //DOS _EXEC(MODE=0, | ||
+ | --- | ||
+ | ^$FF8A^< | ||
+ | |Arg 1|FILE.l|Pointer to file name| | ||
+ | |Arg 2|ATR.w|File attribute (%XLAD_VSHR)| | ||
+ | |Return|The file handle of the created file. If negative, an error occured.|| | ||
+ | |Create a temporary file specified by FILE with attributes ATR. The file name can contain '?', | ||
+ | |||
+ | Usage: | ||
+ | move ATR, | ||
+ | pea (FILE) | ||
+ | DOS _MAKETMP | ||
+ | addq.l # | ||
+ | --- | ||
+ | ^$FF8B^< | ||
+ | |Arg 1|FILE.l|Pointer to file name| | ||
+ | |Arg 2|ATR.w|File attribute (%XLAD_VSHR)| | ||
+ | |Return|The file handle of the created file. If negative, an error occured.|| | ||
+ | |Create a temporary file specified by FILE with attributes ATR. If ATR is 0 it is equivalent to the //archive// attribute. If the file already exists it returns an error (-80).||| | ||
+ | |||
+ | Usage: | ||
+ | move ATR, | ||
+ | pea (FILE) | ||
+ | DOS _MAKETMP | ||
+ | addq.l # | ||
+ |
x68000/doscall.txt · Last modified: 2020/01/26 15:54 by sigvec