x68000:file_transfer_between_windows_pcs_and_x68000_machines_using_null_modem_cable
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
x68000:file_transfer_between_windows_pcs_and_x68000_machines_using_null_modem_cable [2012/03/09 14:23] – eidis | x68000:file_transfer_between_windows_pcs_and_x68000_machines_using_null_modem_cable [2012/03/09 14:59] – eidis | ||
---|---|---|---|
Line 195: | Line 195: | ||
- | ==== 10. Transfer files with 38400 bps speed ==== | + | ==== 10. Transfer files at 38400 bps speed ==== |
- | It is possible to achieve even bigger | + | It is possible to achieve even higher |
Get it here: | Get it here: | ||
http:// | http:// | ||
- | Transfer it to X68000, extract the files from archive and open muterm.cnf in text editor. Change the following lines: | + | Transfer it to X68000, extract the files from archive and open muterm.cnf in text editor. Change the following lines. |
+ | From: | ||
+ | < | ||
+ | PMODE = 0 | ||
+ | *SPEED | ||
+ | XFLOW = 1 | ||
+ | </ | ||
+ | |||
+ | To: | ||
+ | |||
+ | < | ||
+ | PMODE = 1 | ||
+ | SPEED = 38400 | ||
+ | XFLOW = 0 | ||
+ | </ | ||
+ | |||
+ | Start Tera Term Pro. | ||
+ | |||
+ | < | ||
+ | | ||
+ | | ||
+ | Baud rate: 38400 | ||
+ | | ||
+ | | ||
+ | | ||
+ | Flow control: | ||
+ | | ||
+ | 0 msec/ | ||
+ | -Save setup</ | ||
+ | |||
+ | On X68000 side launch MuTerm and use the following keys: | ||
+ | |||
+ | < | ||
+ | F4 - Send | ||
+ | F5 - Receive | ||
+ | BREAK - Interrupt data transfer | ||
+ | SHIFT+BREAK - Exit to HumanOS | ||
+ | </ | ||
+ | |||
+ | |||
+ | ==== 11. Transfer any files at 38400 bps from Windows PC to X68000 ==== | ||
+ | |||
+ | < | ||
+ | -File | ||
+ | | ||
+ | | ||
+ | -Send | ||
+ | | ||
+ | | ||
+ | |||
+ | At X68000 in MuTerm press F5, type any name for the incoming file and press Enter. | ||
+ | |||
+ | |||
+ | ==== 12. Transfer any files at 38400 bps from X68000 to Windows PC ==== | ||
+ | |||
+ | < | ||
+ | -File | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | | ||
+ | -Type any name for the incoming file and click Open</ | ||
+ | |||
+ | At X68000 in MuTerm press F4, then hit Enter and select the file you want to transfer. |
x68000/file_transfer_between_windows_pcs_and_x68000_machines_using_null_modem_cable.txt · Last modified: 2020/06/20 19:23 by NFG