Differences

This shows you the differences between two versions of the page.

--- x68000:floppy_pinout [2015/01/30 00:15] – eidis
+++ x68000:floppy_pinout [2015/02/02 01:22] – eidis
@@ Line 4: / Line 4: @@
 You can use a [[PC Floppy Drive]] if you can do without the sexy extra features (soft-eject, das blinkenlights).
-{{http://www.gamesx.com/grafx/db37.gif}}
+|  {{:x68000:floppy_connectors.jpg?220}}  |  {{http://www.gamesx.com/grafx/db37.gif}}  |   {{:x68000:idc34_female_connector.png?200}}  |
+|  IDC34 and 34-Pin Edge Connector  |  DB37 Male Connector  |  IDC34 Female  Connector  |
+{{  :x68000:external_floppy_socket.jpg?400}}
-|  1|/Disk Type Select*|Out|Disk type selection signal|
-|  2|NC|  -  |Not connected|
+^  Ext.  ^  Int.  ^Signal  ^  Dir.  ^Description  ^
-|  3|/Drive Select 3|Out|Drive selection signal 3|
+|  1  |  2  |/Disk Type Select*|Out|Disk type selection signal|
-|  4|/Index|  In  |Disk index signal|
+|  2  |  NC  |NC|  -  |Not connected|
-|  5|/Drive Select 0|Out|Drive selection signal 0|
+|  3  |  6  |/Drive Select 3|Out|Drive selection signal 3|
-|  6|/Drive Select 1|Out|Drive selection signal 1|
+|  4  |  8  |/Index|  In  |Disk index signal|
-|  7|/Drive Select 2|Out|Drive selection signal 2|
+|  5  |  10  |/Drive Select 0|Out|Drive selection signal 0|
-|  8|/Motor On|Out|Motor starting signal|
+|  6  |  12  |/Drive Select 1|Out|Drive selection signal 1|
-|  9|/Direction|Out|Head moving direction signal|
+|  7  |  14  |/Drive Select 2|Out|Drive selection signal 2|
-|10|/Step|Out|Head movement signal|
+|  8  |  16  |/Motor On|Out|Motor starting signal|
-|11|/Write Data|Out|Write data signal|
+|  9  |  18  |/Direction|Out|Head moving direction signal|
-|12|/Write Gate|Out|Write gate signal|
+|  10  |  20  |/Step|Out|Head movement signal|
-|13|/Track 00|  In  |Back to track 0|
+|  11  |  22  |/Write Data|Out|Write data signal|
-|14|/Write Protect|  In  |Write protect signal|
+|  12  |  24  |/Write Gate|Out|Write gate signal|
-|15|/Read Data|  In  |Read data signal|
+|  13  |  26  |/Track 00|  In  |Back to track 0|
-|16|/Side Select|Out|Head switching signal|
+|  14  |  28  |/Write Protect|  In  |Write protect signal|
-|17|/Ready|  In  |Drive ready signal|
+|  15  |  30  |/Read Data|  In  |Read data signal|
-|18|NC|  -  |Not connected|
+|  16  |  32  |/Side Select|Out|Head switching signal|
-|19|NC|  -  |Not connected|
+|  17  |  34  |/Ready|  In  |Drive ready signal|
-|20|/Option Select 0*|Out|Option select 0|
+|  18  |  NC  |NC|  -  |Not connected|
-|21|/Option Select 1*|Out|Option Select 1|
+|  19  |  NC  |NC|  -  |Not connected|
-|22|/Option Select 2*|Out|Option select 2 (CZ-600C dedicated signal)|
+|  20  |  1  |/Option Select 0*|Out|Option select 0|
-|23|/Option Select 3*|Out|Option Select 3|
+|  21  |  3  |/Option Select 1*|Out|Option Select 1|
-|24|/Eject*|Out|Eject signal|
+|  22  |  5  |/Option Select 2*|Out|Option select 2 (CZ-600C dedicated signal)|
-|25|/Eject Mask*|Out|Eject mask signal|
+|  23  |  7  |/Option Select 3*|Out|Option Select 3|
-|26|/LED Blink*|Out|LED flashing signal|
+|  24  |  9  |/Eject*|Out|Eject signal|
-|27|/Disk In*|  In  |Disk insertion signal|
+|  25  |  11  |/Eject Mask*|Out|Eject mask signal|
-|28|/ERR Disk*|  In  |Disk insertion error signal|
+|  26  |  13  |/LED Blink*|Out|LED flashing signal|
-|29|/FDD INT*|  In  |Disk interrupt signal|
+|  27  |  15  |/Disk In*|  In  |Disk insertion signal|
-|30|Ground|Out|Ground|
+|  28  |  17  |/ERR Disk*|  In  |Disk insertion error signal|
-|31|Ground|Out|Ground|
+|  29  |  19  |/FDD INT*|  In  |Disk interrupt signal|
-|32|Ground|Out|Ground|
+|  30  |  GND  |Ground|Out|Ground|
-|33|Ground|Out|Ground|
+|  31  |  GND  |Ground|Out|Ground|
-|34|Ground|Out|Ground|
+|  32  |  GND  |Ground|Out|Ground|
-|35|Ground|Out|Ground|
+|  33  |  GND  |Ground|Out|Ground|
-|36|Ground|Out|Ground|
+|  34  |  GND  |Ground|Out|Ground|
-|37|NC|  -  |Not connected|
+|  35  |  GND  |Ground|Out|Ground|
+|  36  |  GND  |Ground|Out|Ground|
+|  37  |  NC  |NC|  -  |Not connected|
 * Not available on standard Shugart drives
 **Drive Selection**