Differences

This shows you the differences between two versions of the page.

--- x68000:midi_cable [2014/08/10 01:11] – eidis
+++ x68000:midi_cable [2014/08/10 01:18] – eidis
@@ Line 1: / Line 1: @@
 **How to make the mini DIN 5pin to DIN 5pin convert cable for SYSTEM SACOM Co.Ltd's MIDI board.**
-|{{:x68000:midi_cable_1.gif?800|}}  |{{:x68000:midi_cable_2.gif?100|}}  |
+|{{:x68000:midi_cable_2.gif?100|}}  |{{:x68000:midi_cable_1.gif?900|}}  |
+All information taken from http://www.sssp.mihara.hiroshima.jp/~shimsoft/x68/midicable/mkmidicablee.html
 Required Materials (Parts and Tools)
-|DIN 5 pin jack connector   |Qty. 1  |
+|DIN 5 pin socket   |Qty. 1  |
-|Mini DIN 5 pin plug connector  |Qty. 1  |
+|Mini DIN 5 pin connector  |Qty. 1  |
 |5 wire cable  |Qty. Your required length. Mine was about 15cm.  |
-The image shows solder side of the connectors. Connect points as shown in the diagram (1-1,2-2, ...5-5). Test the connections with a multimeter and make sure that they are correct. Connect the cable to MIDI board and MIDI sound module via MIDI Standard cable.
+The Sharp boards and the 2nd SACOM board have the same pinout. The image shows solder side of the connectors. Connect points as shown in the diagram (1-1,2-2, ...5-5). Test the connections with a multimeter and make sure that they are correct. Connect the cable to MIDI board and MIDI sound module via MIDI Standard cable.
 **Example:**
@@ Line 14: / Line 16: @@
 X68k MIDI board's MIDI out port -> Created cable -> MIDI standard cable -> MIDI sound module
-Try playing music on X68k with Z-music or other music system software. If MIDI sound module is receiving the MIDI message, then your job is finished.
+Try playing music on X68k with Z-music or other music software. If MIDI sound module is receiving the MIDI message, then your work is done.