Differences

This shows you the differences between two versions of the page.

--- x68000:sram_issues [2008/10/11 03:46] – computolio
+++ x68000:sram_issues [2014/08/08 15:42] – eidis
@@ Line 1: / Line 1: @@
+====== Headline ======
 ==SRAM Issues==
@@ Line 13: / Line 15: @@
 {{x68000:x68000srameraseprompt.png}}
-If you have an older machine the process is more involved. You'll need a debugger of some kind. [[http://homepage2.nifty.com/m_kamada/docs/unlistedx68k.htm#startupkey_clr|This site]] reccommends you use the one from [[http://retropc.net/x68000/software/sharp/xc21/index.htm|C Compiler PRO-68K]]. Boot the first disk (an image is in the archive called "XC2101I.LZH"). After answering "N" to the prompt that pops up it should dump you back in HumanOS. Then type:
+If you have an older machine the process is more involved. You have two options:
+The most simplest is to download [[http://nfggames.com/X68000/Misc/Sram/SRAMLOAD.Lzh|SRAMLOAD.Lzh]] and use SRAM_CLR.R to clear the contents of SRAM.
+You can use a debugger. [[http://homepage2.nifty.com/m_kamada/docs/unlistedx68k.htm#startupkey_clr|This site]] reccommends you use the one from [[http://retropc.net/x68000/software/sharp/xc21/index.htm|C Compiler PRO-68K]]. Boot the first disk (an image is in the archive called "XC2101I.LZH"). After answering "N" to the prompt that pops up it should dump you back in HumanOS. Then type:
 ''db \\
@@ Line 21: / Line 27: @@
 q''
-This should reset the protected area of the SRAM. Pop the disk out, restart and you should get your normal disk prompt back. Make sure to redo your settings in SWITCH.X, as they'll be reset to their default options after this.
+This should reset the SRAM. Pop the disk out, restart and you should get your normal disk prompt back. Make sure to redo your settings in SWITCH.X, as they'll be reset to their default options after this.