Differences

This shows you the differences between two versions of the page.

--- arcade:joystick_mechs [2024/06/19 17:53] – Added Nintendo stick diagrams NFG
+++ arcade:joystick_mechs [2024/06/21 00:10] (current) – NFG
@@ Line 38: / Line 38: @@
 ===== SNK / Sigma / ASCII / Seimitsu =====
-SNK's home consoles used Seimitsu mechs (or clones of them) with a 40mm pattern.  Shown below is a mech from a NeoGeo AES joystick (the original and CD sticks used the same mechs).  On the right, the same mechanism mounted to Seimitsu's 40mm plate included with the SELS-70X.
+SNK's Neo Geo home consoles used Seimitsu LS-22 mechs (or clones of them, as they're unmarked) with a 40mm pattern.  Shown below (left) is a mech from a Neo Geo AES joystick.  Both the original cartridge system and CD sticks used the same mechs.  The centre image shows the same mechanism mounted to Seimitsu's 40mm plate included with the SELS-70X.  The image on the right shows a mech taken from a Sigma or ASCII stick (I forget which).  It is clearly marked Seimitsu Co. Ltd, LS-22.
-These same mechs (or clones of them) were also used in sticks from Sigma (The Σ-2200 definitely used a Seimitsu mech) and very early ASCII models.
+These same mechs (or clones of them) were also used in sticks from Sigma (The Σ-2200 definitely used a Seimitsu mech) and some early ASCII models, like the ones made for MSX computers, and the Nintendo Famicom.  SNK's rotating Loop Lever, a Seimitsu LS-30, also used the same base.
-{{:arcade:snk-stick.jpg?200|SNK's NeoGeo AES Stick Mech}}{{:arcade:snk-seimitsu-40mm.jpg?400|}}
+{{:arcade:snk-stick.jpg?200  |SNK's NeoGeo AES Stick Mech}}{{:arcade:snk-seimitsu-40mm.jpg?200  |SNK NeoGeo mech with Seimitsu SELS mount plate}}{{:arcade:seimitsusnkasciisigma-stickbase.jpg?200|Sigma or ASCII version}}
+Here are some mounting measurements for this device:
+{{  :arcade:seimitsusnkasciisigma.png?400  |Seimitus mech, as used by SNK/ASCII/Sigma}}
 ===== Sanwa =====