arcade:namco_cyber_lead_pinouts
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
arcade:namco_cyber_lead_pinouts [2024/05/03 11:55] – [Joystick] NFG | arcade:namco_cyber_lead_pinouts [2024/07/06 14:52] (current) – revised the tables NFG | ||
---|---|---|---|
Line 2: | Line 2: | ||
Namco' | Namco' | ||
- | For the most part, all the connectors in the cabinet are one of two types, both made by AMP. The data communications are mostly EI series, and everything else is Universal Mate n Lock. | + | For the most part, all the connectors in the cabinet are one of two types, both made by AMP. The data communications are mostly EI series, and almost |
+ | |||
+ | |||
+ | ^ <color # | ||
+ | | | ||
+ | ^ 12-pin Housing | 1-171822-2 | ||
+ | ^ 10-pin Housing | 1-171822-0 | ||
+ | ^ 6-pin Housing | 171822-6 | ||
+ | ^ 2-pin Housing | 172142-2 | ||
+ | ^ Receptacle Contact (26-20 AWG) | 170262-1 | ||
+ | ^ Receptacle Contact (30-26 AWG) | 170205-1 | ||
+ | ^ <color # | ||
+ | | ^ Part No. ^ | ||
+ | ^ 6 Pin Housing | 0039013065 | ||
+ | ^ 8 Pin Housing | 0039039082 | ||
+ | ^ Socket Contact | 39000038 | ||
+ | ^ <color # | ||
+ | | ^ Part No. ^ | ||
+ | ^ 15 Pin Plug | 172171-1 | ||
+ | ^ 15 Pin Cap | 172163-1 | ||
+ | ^ 22-18 AWG __Socket__ Contact | 770988-1 | ||
+ | ^ 22-18 AWG __Plug__ Contact | 770987-1 | ||
+ | | Namco recommends **22 AWG** for comms, **18 AWG** for power || | ||
+ | |||
+ | **Note:** The Mini-Universal Mate-N-Lock connector can use either plug or socket connectors in both plug and cap housings. | ||
+ | |||
+ | |||
+ | ---- | ||
===== JVS CONV PCB ===== | ===== JVS CONV PCB ===== | ||
Line 8: | Line 35: | ||
==== N48 Harness Connector ===== | ==== N48 Harness Connector ===== | ||
- | It's called the N48 Harness according to Namco docs, so this is the N48 Harness Connector. | + | It's called the N48 Harness according to Namco docs, so this is the N48 Harness Connector. It's labeled J104. It handles extra player buttons, as well as extra speaker outputs from the PCB. |
+ | ^ <color # | ||
| {{: | | {{: | ||
^ Pin ^ Function | ^ Pin ^ Function | ||
Line 18: | Line 46: | ||
| 5 | P2 Button 4 | 10 | GND | | | 5 | P2 Button 4 | 10 | GND | | ||
+ | |||
+ | ---- | ||
===== I/O & LED Board ===== | ===== I/O & LED Board ===== | ||
Line 23: | Line 53: | ||
==== Player Controls ==== | ==== Player Controls ==== | ||
- | Pretty standard stuff here. | + | Pretty standard stuff here. |
+ | ^ <color # | ||
| {{: | | {{: | ||
^ Pin ^ Function | ^ Pin ^ Function | ||
Line 33: | Line 64: | ||
| 5 | Start | 11 | Button 6 | | | 5 | Start | 11 | Button 6 | | ||
| 6 | Button 1 | 12 | GND | | | 6 | Button 1 | 12 | GND | | ||
+ | |||
+ | |||
+ | ==== Coin Control ==== | ||
+ | Labeled J38 on the board, this connector is wired to the coin input and counter. | ||
+ | |||
+ | ^ <color # | ||
+ | | {{: | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | GND | 4 | Counter 1 | | ||
+ | | 2 | Coin 1 | 5 | Counter 2 | | ||
+ | | 3 | Coin 2 | 6 | Service | | ||
+ | |||
+ | |||
+ | ==== Power ==== | ||
+ | +5V is available from J31, using a 2-pin connector. | ||
+ | |||
+ | ^ <color # | ||
+ | | {{: | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | +5V | 2 | GND | | ||
+ | |||
+ | The key is sort of useless on a 2-pin connector so pay attention. | ||
+ | |||
+ | |||
+ | ==== LED Panel ==== | ||
+ | The connection to the LED panel itself, from the LED board beneath it, uses the same 10-pin connector as the N48 harness. | ||
+ | |||
+ | ^ <color # | ||
+ | | {{: | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | S-DATAR | 6 | X-LATCH | | ||
+ | | 2 | | 7 | SCAN-CLK | | ||
+ | | 3 | S-CLK | 8 | YG | | ||
+ | | 4 | LED-ON | 9 | S-DATAG | | ||
+ | | 5 | LED-ENB | 10 | | | ||
+ | |||
+ | ==== LED Serial Cable ==== | ||
+ | The 6-pin mini-DIN plugs on the two boards are standard PC/Mac serial ports. | ||
+ | |||
+ | It's a straight through configuration, | ||
+ | |||
+ | ---- | ||
===== Joystick ===== | ===== Joystick ===== | ||
Line 57: | Line 130: | ||
^ Contact (28-22 AWG) | SHF-001T-0.8BS | ^ Contact (28-22 AWG) | SHF-001T-0.8BS | ||
^ Contact (30-28 AWG) | SHF-002T-0.8BS | ^ Contact (30-28 AWG) | SHF-002T-0.8BS | ||
+ | |||
+ | ---- | ||
+ | |||
+ | ===== Power Supply ==== | ||
+ | There are two output connectors on the PSU, which are 8 and 6 pin Molex New Mini-Fit Jr connectors. | ||
+ | |||
+ | ^ <color # | ||
+ | | {{ : | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | 2.5V | 2 | 3.3V | 3 | 5V | | ||
+ | | 4 | GND | 5 | GND | 6 | GND | | ||
+ | |||
+ | |||
+ | ^ <color # | ||
+ | | {{ : | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | 2.5V | 2 | 3.3V | 3 | 5V | 4 | 12V | | ||
+ | | 6 | GND | 7 | GND | 7 | GND | 8 | GND | | ||
+ | |||
+ | | ||
+ | |||
+ | ===== Power ===== | ||
+ | This plug connects the power cables from the PSU to the rest of the cabinet. | ||
+ | |||
+ | ^ <color # | ||
+ | | {{ : | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | 12V | 2 | 12V | 3 | GND | 4 | GND | 5 | GND | | ||
+ | | 6 | 3.3V | 7 | 3.3V | 8 | GND | 9 | GND | 10 | GND | | ||
+ | | 11 | 5V | 12 | 5V | 13 | 5V | 14 | GND | 15 | GND | | ||
+ |
arcade/namco_cyber_lead_pinouts.1714701312.txt.gz · Last modified: 2024/05/03 11:55 by NFG