arcade:namco_cyber_lead_pinouts
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
arcade:namco_cyber_lead_pinouts [2024/06/13 13:36] – Many Updates! More to come. NFG | arcade:namco_cyber_lead_pinouts [2024/07/06 14:52] (current) – revised the tables NFG | ||
---|---|---|---|
Line 5: | Line 5: | ||
- | ^ <color #00a2e8>JST EI Series (Comms)</ | + | ^ <color #00a2e8>AMP/ |
| | | | ||
^ 12-pin Housing | 1-171822-2 | ^ 12-pin Housing | 1-171822-2 | ||
Line 37: | Line 37: | ||
It's called the N48 Harness according to Namco docs, so this is the N48 Harness Connector. | It's called the N48 Harness according to Namco docs, so this is the N48 Harness Connector. | ||
+ | ^ <color # | ||
| {{: | | {{: | ||
^ Pin ^ Function | ^ Pin ^ Function | ||
Line 44: | Line 45: | ||
| 4 | P1 Button 4 | 9 | P2 Button 6 | | | 4 | P1 Button 4 | 9 | P2 Button 6 | | ||
| 5 | P2 Button 4 | 10 | GND | | | 5 | P2 Button 4 | 10 | GND | | ||
+ | |||
---- | ---- | ||
Line 51: | Line 53: | ||
==== Player Controls ==== | ==== Player Controls ==== | ||
- | Pretty standard stuff here. Labeled J33 (P1) and J35, these are EI-series 12-pin connectors, used to connect all the signals from the control panel to the PCB. The pinout is the same for P1 and P2. The manual indicates a red connector is used for player 2. | + | Pretty standard stuff here. Labeled |
+ | ^ <color # | ||
| {{: | | {{: | ||
^ Pin ^ Function | ^ Pin ^ Function | ||
Line 66: | Line 69: | ||
Labeled J38 on the board, this connector is wired to the coin input and counter. | Labeled J38 on the board, this connector is wired to the coin input and counter. | ||
+ | ^ <color # | ||
| {{: | | {{: | ||
^ Pin ^ Function | ^ Pin ^ Function | ||
Line 76: | Line 80: | ||
+5V is available from J31, using a 2-pin connector. | +5V is available from J31, using a 2-pin connector. | ||
+ | ^ <color # | ||
| {{: | | {{: | ||
^ Pin ^ Function | ^ Pin ^ Function | ||
Line 86: | Line 91: | ||
The connection to the LED panel itself, from the LED board beneath it, uses the same 10-pin connector as the N48 harness. | The connection to the LED panel itself, from the LED board beneath it, uses the same 10-pin connector as the N48 harness. | ||
+ | ^ <color # | ||
| {{: | | {{: | ||
^ Pin ^ Function | ^ Pin ^ Function | ||
Line 124: | Line 130: | ||
^ Contact (28-22 AWG) | SHF-001T-0.8BS | ^ Contact (28-22 AWG) | SHF-001T-0.8BS | ||
^ Contact (30-28 AWG) | SHF-002T-0.8BS | ^ Contact (30-28 AWG) | SHF-002T-0.8BS | ||
+ | |||
+ | ---- | ||
+ | |||
+ | ===== Power Supply ==== | ||
+ | There are two output connectors on the PSU, which are 8 and 6 pin Molex New Mini-Fit Jr connectors. | ||
+ | |||
+ | ^ <color # | ||
+ | | {{ : | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | 2.5V | 2 | 3.3V | 3 | 5V | | ||
+ | | 4 | GND | 5 | GND | 6 | GND | | ||
+ | |||
+ | |||
+ | ^ <color # | ||
+ | | {{ : | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | 2.5V | 2 | 3.3V | 3 | 5V | 4 | 12V | | ||
+ | | 6 | GND | 7 | GND | 7 | GND | 8 | GND | | ||
+ | |||
+ | | ||
+ | |||
+ | ===== Power ===== | ||
+ | This plug connects the power cables from the PSU to the rest of the cabinet. | ||
+ | |||
+ | ^ <color # | ||
+ | | {{ : | ||
+ | ^ Pin ^ Function | ||
+ | | 1 | 12V | 2 | 12V | 3 | GND | 4 | GND | 5 | GND | | ||
+ | | 6 | 3.3V | 7 | 3.3V | 8 | GND | 9 | GND | 10 | GND | | ||
+ | | 11 | 5V | 12 | 5V | 13 | 5V | 14 | GND | 15 | GND | | ||
+ |
arcade/namco_cyber_lead_pinouts.1718249796.txt.gz · Last modified: 2024/06/13 13:36 by NFG