arcade:sega_city_cabinet_pinouts
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
arcade:sega_city_cabinet_pinouts [2023/05/21 22:14] – [Audio] NFG | arcade:sega_city_cabinet_pinouts [2024/02/03 00:32] (current) – [Coin Input] NFG | ||
---|---|---|---|
Line 6: | Line 6: | ||
=== Gender, Pins, Tabs & Sockets === | === Gender, Pins, Tabs & Sockets === | ||
- | Somewhat confusingly, | + | ⚠️ The TE series plastic |
For all of these connectors, the part codes are listed. | For all of these connectors, the part codes are listed. | ||
^ Function | ^ Function | ||
- | ^ Controller | 12 | | + | ^ Controller | 12 | |
- | ^ Extra Buttons | 10 | | + | ^ Extra Buttons | 10 | |
^ Analogue | 8 | 176275-1 | ^ Analogue | 8 | 176275-1 | ||
^ Video | 15 | 176279-1 | ^ Video | 15 | 176279-1 | ||
^ Audio | 4 | 176273-1 | ^ Audio | 4 | 176273-1 | ||
+ | ^ Coin | 3 | 176272-1 | ||
^ Power Supply | ^ Power Supply | ||
- | ^ AC Input | 15 | 176279-1 | + | ^ AC Input | 15 | 176279-1 |
- | ^ AC Output | 9 | 176276-1 | + | ^ AC Output | 9 | 176276-1 |
- | ^ Primary DC | 18 | 176280-9 | + | ^ Primary DC | 18 | 176280-9 |
- | ^ Secondary DC | 12 | 176280-1 | + | ^ Secondary DC | 12 | 176280-1 |
- | ^ | + | ^ ^^ |
- | ^ | + | | Inner Connectors ^^ Receptacle |
- | ^ | + | ^ |
+ | ^ | ||
+ | |||
+ | For the **power supply** sockets, the second part number indicates the panel-mount part. The first number is for cables. | ||
**ProTip:** A very expensive special tool is needed when pins are removed from these connectors. | **ProTip:** A very expensive special tool is needed when pins are removed from these connectors. | ||
Line 77: | Line 81: | ||
^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ^ Pin ^ Function ^ Pin ^ Function ^ Pin ^ Function ^ | ||
- | | 1 | P1 Button 4| 6 | P2 Button 4 | 11 | | + | | 1 | P1 Button 4| 6 | P2 Button 4 | 11 | |
- | | 2 | P1 Button 5 | 7 | P2 Button 5 | 12 | | + | | 2 | P1 Button 5 | 7 | P2 Button 5 | 12 | |
- | | 3 | P1 Button 6 | 8 | P2 Button 6 | 13 | | + | | 3 | P1 Button 6 | 8 | P2 Button 6 | 13 | |
- | | 4 | P1 Button 7| 9 | P2 Button 7 | 14 | | + | | 4 | P1 Button 7| 9 | P2 Button 7 | 14 | |
- | | 5 | Ground | 10 | Ground | 15 | | + | | 5 | Ground | 10 | Ground | 15 | |
===== Analogue Input ===== | ===== Analogue Input ===== | ||
Line 175: | Line 179: | ||
| 1 | +5V | 3 | Coin Counter | | | 1 | +5V | 3 | Coin Counter | | ||
| 2 | GND in | 4 | GND to coin | | | 2 | GND in | 4 | GND to coin | | ||
+ | |||
+ | ===== Coin Input ===== | ||
+ | |||
+ | These 3-pin coin input connectors are found in the Naomi and Net City series of cabinets. | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function | | ||
+ | | 1 | Coin Switch | | ||
+ | | 2 | +12V | | ||
+ | | 2 | GND | | ||
+ | ===== JVS Power ===== | ||
+ | |||
+ | Sega's JVS board, found in the New Net City and Naomi Universal cabs, uses both 5V and 12V. If you're putting one in an Astro City, the standard PSU has an unused output connector that provides an easy source for both. The 8-pin power plug pinout for the JVS is: | ||
+ | |||
+ | {{: | ||
+ | |||
+ | ^ Pin ^ Function ^ Pin ^ Function ^ | ||
+ | | 1 | 5V | 5 | Ground | ||
+ | | 2 | 5V | 6 | Ground | ||
+ | | 3 | 12V | 7 | Ground | ||
+ | | 4 | 12V | 8 | Ground | ||
+ | |||
arcade/sega_city_cabinet_pinouts.1684671261.txt.gz · Last modified: 2023/05/21 22:14 by NFG