av:scart2rgb
Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
av:scart2rgb [2005/10/30 10:52] – created nfg | av:scart2rgb [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ===== RGB / SCART Adaptors ===== | + | ===== RGB / SCART Adaptors ===== |
- | Being in a PAL land now (Australia) I'm suddenly aware of a definitive solution for converting RGB to SCART for blissfully clear gaming love. Here then is how I did it: | + | |
- | First I hacked up my custom made SCART extension cable - it had a female SCART on one end and a male SCART on the other end. It was a straight-through cable, each pin went from 1 to 1, 2 to 2 etc. Nothing special. | + | Being in a PAL land now (Australia) I'm suddenly aware of a need for a definitive solution for converting RGB to SCART for blissfully clear gaming love. Here then is how I did it: |
+ | |||
+ | First I hacked up my custom made SCART extension cable - it had a female SCART on one end and a male SCART on the other end. It was a straight-through cable, each pin went from 1 to 1, 2 to 2 etc. Nothing special. | ||
+ | |||
+ | {{connectors: | ||
==== The pinout ==== | ==== The pinout ==== | ||
^ RGB ^ Signal ^ SCART ^ | ^ RGB ^ Signal ^ SCART ^ | ||
- | | 15 | Red | 15 | | + | | 15 | Red | 15 | |
- | | 19 | Green | 11 | | + | | 19 | Green | 11 | |
- | | 20 | Blue | 7 | | + | | 20 | Blue | 7 | |
- | | 9 | Sync/Video | 20 | | + | | 9 | Sync/ |
- | | 1 | Left | 2 | | + | | 1 | Left | 6 |
- | | 5 | Right | 6 | | + | | 5 | Right | 2 |
- | | 16 | +5v/ | + | | 16 | +5v/ |
- | | 13, 18, 17 | Ground | 13, 14, 17 | | + | | 13, 18, 17 | Ground |
- | | 7, 3, 21 | Ground | 5, 9, 18, 21 | | + | | 7, 3, 21 | Ground |
==== The Caveats ==== | ==== The Caveats ==== | ||
- | * GameCube, VGA and other devices may not work with H+V Sync instead | + | * Some displays, especially those with TV tuners, require composite video, and won't function |
- | * (Not sure if this is because it's H+V tied together or because it's not composite video, or because I lacked | + | * Many displays will not enter RGB mode without a blanking |
* I used +5v for blanking, but you may need to use a 100Ohm resistor on this line. | * I used +5v for blanking, but you may need to use a 100Ohm resistor on this line. | ||
- | * Ground is Ground, you don't have to separate | + | * Ground is Ground, you don't have to use separate |
+ | |||
+ | ==== Other Useful Stuff ==== | ||
+ | * [[japanese_rgb-21|RGB-21 Connector]] in more detail | ||
+ | * [[http:// | ||
+ | * If you're connecting your display to a console or device that doesn' |
av/scart2rgb.1130633548.txt.gz · Last modified: 2019/08/27 20:44 (external edit)