x68000:cz-6bs1_-_genuine_sharp_scsi_board
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
x68000:cz-6bs1_-_genuine_sharp_scsi_board [2011/12/11 08:38] – eidis | x68000:cz-6bs1_-_genuine_sharp_scsi_board [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 48: | Line 48: | ||
4-1 Names of Parts | 4-1 Names of Parts | ||
- | {{: | + | {{: |
4-2 Jumper settings | 4-2 Jumper settings | ||
- | Jumpers JP1, JP2 set the interrupt priority for 68000MPU | + | Jumpers JP1, JP2 set the interrupt priority for 68000 CPU to level 2 or 4 (Source I/0 is available in two levels) and the board interprets from the jumper settings which one to use. Factory default is set to level 2. If you own the software, interrupt handling is set as follows. |
Set the priority level of the interrupt request signal with jumper JP2, set the interrupt priority level of the allowed signal with jumper JP1. The priority level can be selected as Level 2 or Level 4. | Set the priority level of the interrupt request signal with jumper JP2, set the interrupt priority level of the allowed signal with jumper JP1. The priority level can be selected as Level 2 or Level 4. | ||
Line 62: | Line 62: | ||
Both jumpers must be set at the same level. | Both jumpers must be set at the same level. | ||
- | 4-3 Compatible X68000 | + | 4-3 Compatible X68000 |
- | *CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C installed in the case of the connector and attach to the I/0 slot 2. | + | *When used in tower models such as CZ-600C, CZ-601C, CZ611C, CZ-602C, CZ-612C, CZ-603C, CZ-613C |
- | *These boards | + | *For desktop models such as CZ-652C, CZ-653C, CZ-662C, CZ-663C please |
- | + | ||
- | (CZ-6BG1, CZ-6BU1, CZ-6BL1, CZ-6BL2, CZ-board such as 6BN1 is in relation to the connector, in conjunction with this board please note that you can.) | + | |
- | ● CZ-652C, CZ-653C, CZ-662C, CZ-663C | + | |
- | The board that use of the ※ I / O slot cover, | + | |
- | However, for the computer (CZ-600C, CZ-601C, CZ-611C, CZ-602C, CZ-612C, CZ-603C, CZ-for 613C) I / O slot cover, | + | |
" | " | ||
- | {{: | + | {{: |
x68000/cz-6bs1_-_genuine_sharp_scsi_board.1323556705.txt.gz · Last modified: 2019/08/27 20:44 (external edit)