x68000:internal_scsi_and_cf_card_mod
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
x68000:internal_scsi_and_cf_card_mod [2011/12/10 12:48] – eidis | x68000:internal_scsi_and_cf_card_mod [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | The following information was kindly contributed by our forum member Caius. Thank you for the excellent tutorial and keep up the good work ! | ||
- | |||
===== X68000 CompactXVI and Compact Flash card: a successful story! ===== | ===== X68000 CompactXVI and Compact Flash card: a successful story! ===== | ||
+ | The following information was kindly contributed by our forum member **Caius**. Thank you for the excellent tutorial and keep up the good work ! | ||
+ | |||
First of all I must say that this kind of mod is more difficult to do since X68000 CompactXVI doesn' | First of all I must say that this kind of mod is more difficult to do since X68000 CompactXVI doesn' | ||
Line 28: | Line 28: | ||
Here is the layout: | Here is the layout: | ||
- | {{:x68000:x68000_compactxvi_cf_mod_internal_scsi_adapter_layout.jpg?500|}} | + | {{:x68000:x68000_compactxvi_internal_scsi_adapter_layout_v2.jpg?500|}} |
+ | |||
+ | And here is the layout in ExpressPCB format: | ||
+ | |||
+ | [[http:// | ||
Obviously you have to put the pin headers soldering them on the top layer of the board ( the 30 pin headers downward and the 50 ones faced up) then you have to piggyback the board on the previously installed sockets. Connect a SCSI 50 pin cable from piggyback board to SCSI to IDE adapter and then connect it to the CF to IDE adapter. Click on the following images to enlarge. | Obviously you have to put the pin headers soldering them on the top layer of the board ( the 30 pin headers downward and the 50 ones faced up) then you have to piggyback the board on the previously installed sockets. Connect a SCSI 50 pin cable from piggyback board to SCSI to IDE adapter and then connect it to the CF to IDE adapter. Click on the following images to enlarge. | ||
Line 35: | Line 39: | ||
|{{: | |{{: | ||
- | For my test I used the great Eidis HD image which I restored onto a 1GB Sandisk Compact Flash. I set the jumpers my SCSI to IDE adapter to SCSI ID 3. Regarding other settings | + | For my test I used the great Eidis HD image which I restored onto a 1GB Sandisk Compact Flash. I set the jumpers |
{{: | {{: | ||
That's all. If you have any question, feel free to ask, I will be glad to answer! | That's all. If you have any question, feel free to ask, I will be glad to answer! | ||
- | Special thanks go to Painkilla, Eidis and Damphird | + | Special thanks go to Painkilla, Eidis and Dhampird |
x68000/internal_scsi_and_cf_card_mod.1323485285.txt.gz · Last modified: 2019/08/27 20:44 (external edit)