x68000:internal_scsi_and_cf_card_mod
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
x68000:internal_scsi_and_cf_card_mod [2011/12/20 03:10] – eidis | x68000:internal_scsi_and_cf_card_mod [2019/08/27 20:45] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 32: | Line 32: | ||
And here is the layout in ExpressPCB format: | And here is the layout in ExpressPCB format: | ||
- | [[http:// | + | [[http:// |
Obviously you have to put the pin headers soldering them on the top layer of the board ( the 30 pin headers downward and the 50 ones faced up) then you have to piggyback the board on the previously installed sockets. Connect a SCSI 50 pin cable from piggyback board to SCSI to IDE adapter and then connect it to the CF to IDE adapter. Click on the following images to enlarge. | Obviously you have to put the pin headers soldering them on the top layer of the board ( the 30 pin headers downward and the 50 ones faced up) then you have to piggyback the board on the previously installed sockets. Connect a SCSI 50 pin cable from piggyback board to SCSI to IDE adapter and then connect it to the CF to IDE adapter. Click on the following images to enlarge. |
x68000/internal_scsi_and_cf_card_mod.1324314633.txt.gz · Last modified: 2019/08/27 20:44 (external edit)